502597
43
Zoom out
Zoom in
Previous page
1/76
Next page
43
ADVANCED FUNCTIONS
The second number indicates whether any surround channels are present:
“0” indicates that no surround information is present.
“1” indicates that a matrixed surround signal is present.
“2” indicates discrete left and right surround channels.
“3” is used with DTS-ES bitstreams to represent the presence of the
discrete surround back channel in addition to the side surround left and
right channels.
“4” is used with 7.1-channel digital formats, including Dolby TrueHD, Dolby
Digital Plus, DTS-HD and DTS-HD Master Audio, to indicate the presence of
two discrete side surround channels and two discrete back surround channels.
The third number is used for the LFE channel:
“0” indicates no LFE channel.
“.1” indicates that an LFE channel is present.
The 6.1-channel signals – Dolby Digital EX and DTS-ES Matrix and
Discrete – each include a flag meant to signal the receiver to decode
the surround back channel.
For Dolby Digital EX materials, the incoming bitstream will be displayed
as 3/2/.1 EX-ON. For older discs, the display may show EX-OFF, but
you will still be able to select the Dolby Digital EX mode manually.
For DTS-ES materials, the incoming bitstream will be displayed as
3/3/.1 ES-ON.
When a PCM signal is received, the PCM message, followed by the
sampling rate of the signal (32kHz, 44.1kHz, 48kHz or 96kHz), will
appear in the front-panel display.
In addition, the Speaker/Channel Input Indicators will indicate the
number of channels discretely encoded in the signal by displaying a
letter inside that channel’s speaker box. A line will connect the SBL and
SBR boxes when a 6.1-channel signal is detected, indicating that the
same signal is playing through both speakers. The letters flash when
no signal is present, such as when a DVD is paused. See Figure 58.
Figure 58 – Speaker/Channel Input Indicators
When only two channels – left and right – are present, the analog
surround modes may be used to decode the signal into the remaining
channels.
If you would prefer a different surround format than the native signal’s
digital encoding, press the Surround Modes Button to display the
Surround Modes menu (see Figure 57).
The Auto Select option (the first line) uses the native signal’s digital
encoding, e.g. Dolby Digital or DTS. For two-channel materials, the
AVR defaults to Logic 7 Movie mode. If you prefer a different surround
processing mode, select the appropriate line from the menu: Virtual
Surround, Stereo, Movie, Music or Video Game.
Each line is set to a default surround mode:
Virtual Surround: Dolby Virtual Speaker Reference
Stereo: 7-channel stereo
Movie: Logic 7 Movie
Music: Logic 7 Music
Video Game: Logic 7 Game
You may change each line’s setting to a different surround mode.
The choice of new modes depends on the number of speakers in
your system.
Virtual Surround: Dolby Virtual Speaker Reference or Wide
Stereo: 2-channel stereo, 5-channel stereo or 7-channel stereo
Movie: Logic 7 Movie, DTS Neo 6:Cinema, Dolby Pro Logic II Movie,
Dolby Pro Logic IIx Movie
Music: Logic 7 Music, DTS Neo 6:Music, Dolby Pro Logic II Music,
Dolby Pro Logic IIx Music
Video Game: Logic 7 Game, Dolby Pro Logic II Game, Dolby Pro
Logic IIx Game
When one of the Dolby Pro Logic II Music modes is selected, access
to the Edit submenu becomes available. This submenu may be used
to adjust special settings available only in Music mode: Center Width,
Dimension and Panorama.
Once you have programmed the default surround mode for each type
of program, simply select the line from the Surround Modes menu any
time you wish to override the AVR’s automatic surround mode selection.
The AVR will use the same surround mode the next time the source
input is selected.
Please refer to Table A12 in the appendix for more information on which
surround modes are available with different bitstreams.
NOTE: Dolby Digital 2.0 signals may also include a Dolby
Surround flag indicating DS-ON or DS-OFF, depending on
whether the 2-channel bitstream contains only stereo informa-
tion, or a downmix of a multichannel program that can be
decoded by the Dolby Pro Logic decoder in the AVR. By default,
these signals are played in Dolby Pro Logic IIx Movie mode, but
you may select another Dolby surround mode manually.
Surround Modes
Surround mode selection is dependent upon the format of the incoming
audio signal, as well as personal taste. There is no harm in experiment-
ing with all of the modes available with any given source material. Table
A12 offers a brief description of each mode the AVR 254 is capable of
using, and also indicates the types of incoming signals or digital bit-
streams the mode may be used with. Additional information about the
Dolby and DTS modes is available on the companies’ Web sites:
www.dolby.com and www.dtsonline.com.
L
C
LFE
R
SL
SR
SBL
SBR
AVR254om.qxd 3/28/08 12:46 PM Page 43
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR254 in the language / languages: English as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info