502597
37
Zoom out
Zoom in
Previous page
1/76
Next page
37
INITIAL SETUP
Europe and elsewhere. The AVR 254 is capable of detecting PAL
video sources and converting them to the NTSC format for display on
American televisions.
Adjust Lip Sync: Use this adjustment to resynchronize the audio and
video signals from a source to eliminate a “lip sync” problem. Lip sync
issues can occur when the video portion of a signal undergoes additional
processing in either the source or the video display that desynchronizes
it from the audio. Select this line to display the Lip Sync adjuster by
itself, enabling you to view the video while listening to the audio. Use the
/
Buttons to delay the audio by up to 180ms. See Figure 51.
Figure 51 – Adjust Lip Sync
Change Name: Use this line to change the display name for your
source. This can be useful if your source’s device type is different from
the available source names. Select this line and use the
/
¤
Buttons
to scroll forward or reverse through the letters A through Z and the
numbers 0 through 9. When the desired character appears, use the
Button to move the cursor to the next position. Move the cursor again
to leave a blank space. When you have finished entering the new name,
press the OK Button. The name will be used on the front panel to refer
to the source, and will appear next to its original name, e.g. DVD,
throughout the on-screen menu system. To clear the entry without
making any changes, scroll to the blank character between “9” and A”.
Audio Auto Polling: Use this setting when both analog and digital audio
connections are made from the source device to the AVR. When no
digital signal is present, the AVR will automatically switch to the analog
audio input.
This can be useful for some older cable television systems that broad-
cast some channels in analog audio and others in digital audio. It is also
useful for making analog recordings of copy-protected digital sources,
and for multichannel disc players that decode high-resolution multichannel
audio and output it through their multichannel analog audio outputs.
However, it can be inconvenient when no analog audio connection is
made and playback is stopped, as the audio signal will be lost.
If an analog audio connection was made, select it here. If not, choose
the Off setting, and the AVR will always use the digital audio connection.
Zone 2 Audio: When a multizone system has been connected and is
in use, this setting determines the source for the remote zone. Select
the analog audio input the source is connected to. Digital audio is not
available to the multizone system, nor is any type of video.
Use the Back/Exit Button to exit, then return to the Setup Source line of
the Main Menu and select the next source to configure. When you have
finished configuring all sources, press the Back/Exit Button to clear the
menus from view.
You are now ready to begin enjoying your new receiver!
AVR254om.qxd 3/28/08 12:46 PM Page 37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR254 in the language / languages: English as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info