502597
26
Zoom out
Zoom in
Previous page
1/76
Next page
26
INSTALLATION
• Connect the DVD player’s digital audio output to one of the Coaxial or
Optical inputs on the AVR.
If the player is capable of playing multichannel discs, including DVD-Audio,
SACD, Blu-ray Disc and HD-DVD, make the following additional connection
(see Figure 23):
• Connect the DVD player’s 6-/8-channel analog audio outputs to the
6-/8-Channel Analog Audio Inputs on the AVR.
Figure 23 – Connecting a Composite- or S-Video-Equipped Disc Player
NOTES:
• Refer to Table A2 in the appendix for the default audio and
video input assignments for each source. Using the default
connections, if appropriate for your system, may save a few
steps during Initial Setup. However, thanks to the AVR 254’s
flexibility, you may assign any audio and any video input to
any source, as long as the assignments match the physical
connections.
• If you wish to make recordings from a DVD, use an S-video or
composite video input, and an Analog Audio input in addition
to any other connections. The AVR cannot make recordings
from HDMI or component video sources, and digital audio
sources may only be recorded in two channels.
Connect an Audio/Video Recorder (PVD, DVR or TiVo
®
)
HDMI Video:
If the recorder and the TV both have an HDMI connector,
connect the recorder as follows (see Figure 24):
• Connect the recorder’s HDMI output to the HDMI 1, 2 or 3 Input
on the AVR. This connection is for playback only, as the AVR cannot
make recordings from HDMI sources.
To make recordings, follow the instructions below for Composite/
S-video recorders.
Figure 24 – Connecting an HDMI-Equipped Recorder
Component Video: If the recorder or the TV does not have an
HDMI connector, but they both have component video connectors,
connect the recorder as follows (see Figure 25):
• Connect the recorder’s component video output to the Component
Video 1 or 2 Input on the AVR. This connection is for playback only,
as the AVR cannot make recordings from component video sources.
• Connect the recorder’s digital audio output to a Coaxial or Optical
Input on the AVR (if available).
• Follow the instructions in the Composite/S-Video section for making
connections required for recordings.
Figure 25 – Connecting a Component-Video-Equipped Recorder
Composite/S-Video: If the best video connection common to
both the recorder and the TV is either S-video or composite video, or
to make recordings, follow these steps, using only one type of video
connection throughout (see Figure 26):
• Connect the recorder’s S-video/composite video output to the
Video 2 S-Video/Composite Video Input on the AVR.
• Connect the recorder’s S-video/composite video input to the Video 2
S-Video/Composite Video Output on the AVR.
• Connect the recorder’s analog audio outputs to the Analog 4 Audio
Inputs on the AVR.
• Connect the recorder’s analog audio inputs to the Analog 4 Audio
Outputs on the AVR.
AVR 254
AVR 254
AVR 254
AVR254om.qxd 3/28/08 12:45 PM Page 26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR254 in the language / languages: English as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info