502589
15
Zoom out
Zoom in
Previous page
1/42
Next page
15
AVR 156
ENGLISH
Making Connections, continued,
and Set Up the Remote Control
Audio recorders
Connect an analogue audio recorder’s inputs to the AVR’s analogue audio Tape Out
connectors. You can record any analogue audio input signal.
Stereo Audio Cable
(not supplied)
To Stereo Analogue
Record
Inputs
Analogue Recording Device
AVR Analogue Audio
Recorder Connectors
Video recorders
Connect an analogue video recorder’s video input connector to the AVR’s Video 2 Out
Composite Video connector, and its audio input connectors to the AVR’s Video 2 Out
Analogue Audio connectors. You can record any composite video signal.
Analogue Audio/Video
Cable (not supplied)
To Analogue Audio/
Video Record Inputs
Analogue Video
Recording Device
AVR Analogue
Audio Connectors
AVR Analogue
Video Connectors
Connect the Radio Aerials
Connect the supplied FM aerial to the AVR’s FM 75 s Ω Radio Aerial connector. For the
best reception, extend the FM aerial as far as possible.
Bend and fold the base of the supplied AM aerial as shown and connect the aerial s
wires to the AVR’s AM and Gnd connectors. (You can connect either wire to either
connector.) Rotate the aerial as necessary to minimise background noise.
AVR Radio Aerial
Connectors
FM Aerial (supplied)
AM Aerial
(supplied)
Bend and fold base
Connect the 12V Trigger Output
If your system has equipment that can be controlled by a DC trigger signal, connect it to
the AVR’s 12V Trigger connector with a mono 1/8-inch (3.5mm) mini-plug interconnect
cable. The AVR will supply a 12V DC (100mA) trigger signal at this connection whenever
it is powered on.
Device with Trigger
in Connector
AVR
Mono 1/8-inch
(3.5mm)
Mini-Plug
Interconnect
(not supplied)
Connect to AC Power
Connect the AC power cord to the AVR’s AC Input connector and then to a working AC
power outlet.
AVR AC
Input Connector
AC Power
Outlet
Power Cord
(supplied)
Set Up the Remote Control
Install the Batteries in the Remote Control
Remove the remote control’s battery cover, insert the three supplied AAA batteries as
shown in the illustration, and replace the battery cover.
NOTE: Remove the protective plastic from the AVR’s front panel to keep it from reducing
the remote control’s effectiveness.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR156 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR156 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR156

Harman Kardon AVR156 User Manual - German - 42 pages

Harman Kardon AVR156 User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info