Manual Harman Kardon AVR 4000 (page 41 of 58) (English)

8518

Zoom out

Zoom in

1/58

PROGRAMMING THE REMOTE 41

Programming the Remote

To erase all codes that have been programmed to

all devices in the remote, follow these steps:

1. Press any Input Selector

456

and

also the Learn button

2.When the red LED under the Input Selector

turns red and the Program/SPL Indicator

flashes amber, release the buttons.

3. Press and release the same Input Selector

456

again.

4. Press the 9 button

three times.

5.The Program/SPL Indicator

will turn off

and the red light under the Input Selector will

flash on and off once to indicate that the codes

have been erased.

Macro Programming

Macros enable you to easily repeat frequently

used combinations of commands with the press

of a single button on the AVR 4000’s remote

control. Once programmed, a macro will send out

up to 19 different remote codes in a pre-deter-

mined sequential order enabling you to automate

the process of turning on your system, changing

devices, or other common tasks. The AVR’s

remote can store up to five separate macro com-

mand sequences, one that is associated with the

Power On button

, and four more that are

accessed by pressing the Macro buttons

1. Press the Mute button

and the Macro

button

to be programmed or the Power-

On button

at the same time. Note that the

latest selected Input Selector will light red,

and the Program/SPL Indicator

will flash

amber.

2. Enter the steps for the macro sequence by

pressing the button for the actual command

step. Although the macro may contain up to 19

steps, each button press, including those used to

change devices, counts as a step. The

Program/SPL Indicator

will flash green

to confirm each button press as you enter com-

mands.

NOTE: While entering commands for Power On

of any device during a macro sequence, press the

Mute button

. DO NOT press the actual

Power ON button.

• Remember to press the appropriate Input

Selector button

before functions are

changed to another device. This is also needed

for the AVR Selector button

itself, as long

as it’s not lit red and AVR functions shall be pro-

grammed.

3. When all the steps have been entered, press

the Sleep button

to enter the commands.

The red light under the Input Selector

will blink and then turn off.

Example: To program the Macro 1

button

so that it turns on the AVR 4000,TV and a Sat-

Receiver, follow these steps:

• Press the Macro 1 button

and Mute

buttons at the same time and then release them.

• Note that the Program/SPL Indicator will

flash amber.

• Press the AVR Selector

• Press the Mute

button to store the AVR’s

power on command.

• Press the VID 2 Input Selector button

indicate the next command is for “TV Power On.”

• Press the Mute

button to store the TV

Power On Command.

• Press the VID 3 Input Selector button

to indicate the next command is for “Sat-

Receiver Power On.”

• Press the Mute

button to store the Sat-

Receiver Power On command.

• Press the Sleep/Channel Up button

complete the process and store the macro

sequence.

After following these steps, each time you press

the Macro 1 button

, the remote will send

all Power On commands.

Erasing Macro Commands

To remove the commands that have been pro-

grammed into one of the Macro buttons, follow

these steps:

1. Press the Mute button

and the Macro

button

that contains the commands you

wish to erase.

2. Note that the Program/SPL Indicator

will flash amber, and the LED under the AVR

Selector

will turn red.

3. Within ten seconds, press the Surround

Mode Selector/Channel Down button

4. The red LED under the AVR Selector will go

out, and the Program/SPL Indicator

will

turn green and flash three times before it goes

out.

5. When the Program/SPL Indicator

goes

out, the Macro has been erased.

i need circuit diagram for avr 4000 to repair the safety mood Submitted on 1-1-2023 at 14:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 4000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 4000

Harman Kardon AVR 4000 User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 4000 Manual

Product: