Unit does not function when Main Power switch is turned
on
No AC power •Ensure that the power cord is plugged into a live AC •
power outlet
Check if the AC outlet is switch-controlled •
Front-panel Message display lights, but there’s no sound
or picture
Intermittent input connection •Dolby Digital EX •
Dolby Digital 2/2/.0 or .1, 3/2/.0 or .1 •
No sound from any speaker; PROTECT message appears
on Message display
Amplifier is in protection mode due to possible short •
circuit
Dolby Digital Plus via HDMI connection (source device •
decodes to Dolby Digital when a coaxial or optical
connection is used)
No sound from center or surround speakersIncorrect surround mode •
Program material is monophonic •
Incorrect speaker configuration •
Program material is stereo •
Select a surround mode other than stereo •
Mono programs contain no surround information •
Check the speaker configuration in the setup menu •
The surround decoder may not create center- or •
surround-channel information from nonencoded
programs
Unit does not respond to remote control commandsWeak batteries in remote •
AVR not selected •
Remote sensor is obscured •
Change batteries in remote •
Press the Setup/AVR button •
Ensure that the AVR’s front-panel remote sensor is in •
the line of sight of the remote
Intermittent buzzing in tunerLocal interference •Move the AVR or antenna away from computers, •
fluorescent lights, motors or other electrical appliances
(AVR 3650/AVR 365 only): Surround-back speaker
settings cannot be accessed, and the test tone does not
play through the surround back speakers
Multi-zone operation has been selected/Assigned AMP •
channels have been assigned to Zone 2
Use the Speaker Setup menu to reassign the Assigned •
AMP to the surround back left and right channels
(AVR 3650/AVR 2650 only): The SIRIUS Preview
Channel (001) is silent
SIRIUS tuner is not connected •
SIRIUS antenna is in an improper location •
SIRIUS signal requires a refresh •
Ensure that SIRIUS tuner is properly connected •
Re-locate the SIRIUS antenna according to the •
recommendations in the SIRIUS tuner’s instruction
manual. For further help, visit
www.siriusradio.com
Visit www.siriusradio.com •
Unable to activate remote control Programming modeSource Selector button is not held for at least 3 •
seconds
Be sure to hold the Source Selector button for at least •
3 seconds
Remote buttons light, but AVR does not respondRemote is in Zone 2 mode •Slide Zone Selector switch to the Zone 1 position. •
Unable to establish network connectionAVR network programming requires rebooting •Cycle the AVR into the Standby mode, and then turn it •
on again
Additional information on troubleshooting possible problems with your AVR and installation-related issues may be found in the list of “Frequently Asked Questions,” which is
located in the Product Support section of our Web site: www.harmankardon.com
0295CSK - HK (x65Series) AVR3650_365_2650_265 CORE OM, WORK18 danny.indd 4301/07/11 11:34:11
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Harman Kardon AVR 365 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Harman Kardon AVR 365 in the language / languages: English as an attachment in your email.
The manual is 4,43 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
