502541
38
Zoom out
Zoom in
Previous page
1/76
Next page
38
38
INITIAL SETUP
AUDIO IN: By default, the analog audio inputs are assigned at
the factory to all sources, with the following exceptions:
Table 6 – Default Digital Audio Assignments
If you used a digital audio connection for another source, change this
setting to assign the correct digital audio input to the source, even if you
also connected the analog audio outputs of the source to the receiver.
AUTO POLL: The Auto Poll feature is used when both an analog audio
and digital audio connection have been made for one source device.
If for some reason no digital signal is available, the AVR 347 will switch
to the analog inputs for the source. This situation can occur with some
cable or satellite television broadcasts, where some channels are broad-
cast with digital audio and others with analog audio.
For some sources, the Auto Poll feature is unnecessary and may be
undesirable. For example, if your DVD player is stopped, you may not
want to use the analog audio signal or you may have decided not to
connect analog audio. Move the cursor to this line, press the Set Button,
and press the
/ Buttons until OFF appears, disabling the Auto Poll
feature. With Auto Poll turned off, the receiver will only check for a signal
at the audio input assigned to the source.
NOTE: Since The Bridge is connected to the AVR using a
dedicated audio connection, it isn’t possible to select a different
audio input for this source. The AM/FM/XM tuner and 6-/8-
Channel Inputs also use dedicated audio inputs, and it isn’t
possible to select a digital audio input for these sources.
The next three lines in the Input Setup menu activate the tone controls,
and may be skipped at this time. We recommend leaving the tone
controls at their factory defaults for most listening, in order to enjoy the
sound mix created by your favorite movie and music artists. However,
if your room or speakers have unusual characteristics, or simply as
a matter of personal preference, see the Tone Controls section on
page 40 for more information.
VIDEO MODE: This setting is used only with a fully analog video path
(composite, S-video or component video). It has no effect on HDMI
sources and video displays. Due to the design of some analog video
displays and the nature of the video standard, there may be timing
issues with the AVR. If you observe some minor video instability when
using the AVR’s analog video outputs, try changing the Video Mode
setting to Mode B. If you continue to observe problems, connect your
source device’s video output directly to the video display, or consider
upgrading to an HDMI-capable display.
You are now ready to begin enjoying your new receiver!
Source Input Default Digital Audio Input
DVD Coax 1
Video 2 Optical 1
HDMI 1 HDMI 1
HDMI 2 HDMI 2
AVR347 om.qxd 7/10/07 11:01 AM Page 38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR 347 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 347 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 347

Harman Kardon AVR 347 User Manual - German - 64 pages

Harman Kardon AVR 347 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info