Manual Harman Kardon AVR 347 (page 13 of 76) (English)

502541

Zoom out

Zoom in

1/76

MAIN REMOTE CONTROL FUNCTIONS

The AVR 347 remote is capable of controlling 11devices, including the

AVR itself and an iPod docked in the optional The Bridge accessory.

During the installation process, you may program the codes for each

of your source components into the remote. Each time you wish to use

the codes for any component, first press the Selector button for that

component. This changes the button functions to the appropriate codes

for that product.

NOTE: Several of the Input Selectors are shared between two

devices. The selector button will light in red when the remote

is in the device mode printed on the button, and it will light in

green for the device mode printed above the button. To switch

between the two device modes, press the selector

twice

quickly

in succession. The selector will remain in the last-selected mode

until the next time you press the selector twice quickly.

For example, the first time you press the DVD button, the button

will light up in red, indicating that the remote is in DVD mode. If

you press another selector, such as the VID3 selector, and then

press the DVD button again, the DVD button will remain red,

indicating the remote is still in DVD mode. Now press the DVD

button twice quickly. At the first press the button will light red,

indicating that the remote is in DVD mode. On the second press

the button will turn green, indicating that the remote is now in CD

mode. If you press a different selector and return to the DVD/CD

Selector, you will observe that the remote is still in CD mode.

Each Input Selector has been preprogrammed to control certain types

of components, with only the codes specific to each brand and model

changing, depending on which product code is programmed. The

device types programmed into each selector may not be changed;

however you may program the HDMI 1 and 2 selectors with the DVD,

Cable/Satellite or VCR/PVR device type.

DVD: Controls DVD players and recorders.

CD: Controls CD players and recorders.

Tape: Controls cassette decks.

Video 1: Controls VCRs, TiVo

and PVRs.

Video 2: Controls cable and satellite television set-top boxes.

Video 3: Controls televisions and other video displays.

Video 4: Controls televisions and other video displays.

HDMI 1 and 2: Each code set controls a source device (VCR/PVR,

DVD player or cable/satellite set-top box) connected to one of these

two inputs.

XM: Controls the AVR functions for XM Satellite Radio.

The Bridge/DMP: Controls an iPod docked in The Bridge.

Any given button may have different functions, depending on which

component is being controlled. Some buttons are labeled with these

functions. For example, the Sleep and DSP Surround Buttons are

labeled for use as Channel Up/Down Buttons when controlling a televi-

sion or cable box. See Table A8 in the appendix for listings of the

different functions for each type of component.

IR Transmitter Lens: As buttons are pressed on the remote,

infrared codes are emitted through this lens. Make sure it is pointing

toward the component being operated.

Power On Button: Press this button to turn on the AVR or another

device. The Master Power Switch on the AVR 347’s front panel must

first have been switched on.

Mute Button: Press this button to mute the AVR 347’s speaker and

headphone outputs temporarily. To end the muting, press this button

or adjust the volume. Muting is also canceled when the receiver is

turned off.

Program Indicator: This LED lights up or flashes in one of three colors

as the remote is programmed with codes.

Power Off Button: Press this button to turn off the AVR 347 or

another device.

AVR Selector: Press this button to switch the remote to the codes

that operate the receiver.

Input Selectors: Press one of these buttons to select a source

device, which is a component where a playback signal originates, e.g.,

DVD, CD, cable TV, satellite or HDTV tuner, or an iPod docked in the

optional The Bridge. This will also turn on the receiver and switch the

remote’s mode to operate the source device.

XM Radio Button: Press this button to select XM Satellite Radio as

the source. You will need to have purchased and activated an XM antenna

module, and you will also need to subscribe to the XM Radio service.

Visit www.xmradio.com for more information.

AM/FM Button: Press this button to select the tuner as the source,

or to switch between the AM, FM and XM Radio bands.

6-/8-Channel Input Selector: Press this button to select the

6-/8-Channel Inputs as the audio source. The receiver will use the video

input and remote control codes for the last-selected video source.

Learn Button: The AVR 347 remote is capable of “learning”

individual IR codes from the original remote that came with your TV

or a device that is connected to any of the source inputs. See the

Advanced Functions section for instructions on learning remote codes.

Test Tone: Press this button to activate the test tone for manual

output-level calibration.

TV/Video: This button has no effect on the receiver, but is used to

switch video inputs on some video source components.

Sleep Button: Press this button to activate the sleep timer, which

turns off the receiver after a programmed period of time of up to

90 minutes.

Volume Controls: Press these buttons to raise or lower the volume,

which will be shown in decibels (dB) in the Message Display.

DSP Surround: Press this button to select a DSP surround mode

(Hall 1, Hall 2, Theater).

AVR347 om.qxd 7/10/07 11:00 AM Page 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 347 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 347

Harman Kardon AVR 347 User Manual - German - 64 pages

Harman Kardon AVR 347 User Manual - Dutch - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 347 Manual

Product: