502592
17
Zoom out
Zoom in
Previous page
1/42
Next page
17
AVR 1650/AVR 165
ENGLISH
Set Up the AVR
Set Up the AVR
Turn On the AVR
Set the rear-panel Main Power switch to “On.” (The front-panel Power indicator will 1.
glow amber.)
Press the front-panel Power button.2.
Power
Button
Main Power
Switch
Unless you will not be using the AVR for an extended period of time, leave the Main
Power switch set to “On.” When the Main Power switch is turned off, any settings you
have programmed will be preserved for up to four weeks.
IMPORTANT NOTE: If the PROTECT message ever appears in the Message
display, turn off the AVR and unplug it. Check all speaker wires for a short
circuit (“+” and “–” wires touching). If none is found, bring the unit to an
authorized Harman Kardon service center for inspection and repair before
using it again.
Using the On-Screen Menu System
Although it’s possible to configure the AVR using only the remote and the front-panel
Message display, it is easier to use the on-screen menu system.
To access the menu system, press the OSD button on the remote. The Master menu
will appear.
** MASTER MENU **
INPUT SETUP
SURROUND MODE
EzSet/EQ
MANUAL SETUP
SYSTEM SETUP
The Master menu consists of five submenus: Input Setup, Surround Mode, EzSet/EQ,
Manual Setup and System Setup.
Use the Up/Down/Left/Right buttons on the remote to navigate the menu system, and
press the OK button to select a menu or setting line, or to enter a new setting.
The current menu, setting line or setting will appear in the front-panel Message display,
as well as on screen.
To return to the previous menu, navigate to the “Back to Master Menu” line and press
the OK button. To exit the menu system, press the OSD button.
Most users should follow the instructions in this
Set Up the AVR
section to configure
a basic home theater system. You may return to these menus at any time to make
additional adjustments, such as those described in the
Advanced Functions
section, on
pages 20 through 24.
Before you begin initial setup, all loudspeakers, a video display and all source devices
should be connected to the AVR. You should be able to turn on the AVR and view
the Master menu when you press the OSD button. If necessary, reread the
Making
Connections
section and the beginning of this section before continuing.
Configure the AVR for Your Speakers
NOTE: If there are fewer than five main speakers in your system, do not use the
EzSet/EQ process. Instead, proceed as described in
Manual Speaker Setup
, on
page 21.
Plug the supplied EzSet/EQ microphone into the AVR’s Headphone connector.1.
AVR
Headphone
Connector
EzSet/EQ Microphone
(supplied)
Place the microphone at ear height in your listening position2. . The microphone features a
threaded insert on the bottom for mounting on a camera tripod.
Set the volume control on your subwoofer to approximately the halfway point.3.
Turn on your TV and select the TV input where you connected the AVR in 4.
Connect Your
TV or Video Display,
on page 13.
Press the remote control’s OSD button. The AVR’s on-screen display (OSD) Master Menu 5.
will appear on the TV.
** MASTER MENU **
INPUT SETUP
SURROUND MODE
EzSet/EQ
MANUAL SETUP
SYSTEM SETUP
Use the remote’s arrow and OK buttons to select “EzSet/EQ.”6.
* EzSet/EQ *
Place Microphone at
listening position and
plug into Headphone Jack
Do you want to start
EzSet/EQ?
YES NO
Select “YES.”7. The Speaker Configuration menu will appear.
Select “5.1.”8.
The test will begin. Make sure that the room is quiet while the test noise is playing 9.
through the speakers.
When the test finishes, select “View Settings” to see the results of the EzSet/EQ process, 10.
or select “Done” to exit.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR 165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 165 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 165

Harman Kardon AVR 165 User Manual - German - 42 pages

Harman Kardon AVR 165 User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info