Manual Harman Kardon AVR 161 (page 33 of 52) (English)

534556

Zoom out

Zoom in

1/52

ENGLISH

AVR

Advanced Functions

Notes on Setting Speaker Volumes in Home Theater Systems:

While setting your system’s individual speaker volume levels is ultimately up to your

personal taste, here are some ideas you may ﬁnd helpful:

For ﬁlms and video-music programs, your overall goal should be to create an •

enveloping, realistic sound ﬁeld that draws you into the ﬁlm or music program

without drawing your attention away from the action on the screen.

For multichannel music recordings, some music producers will create a sound ﬁeld •

that places the musicians all around you; others will create a sound ﬁeld that places

the musicians in front of you, with more subtle ambience in the surround speakers

(as you would experience in a concert hall).

In most 5.1-channel and 7.1-channel ﬁlm soundtracks, the surround speakers are •

not intended to be as loud or as active as the front speakers. Adjusting the surround

speakers so they are always as loud as the front speakers could make dialogue

difﬁcult to understand and will make some sound effects sound unrealistically loud.

Notes on Setting Subwoofer Volume:

Sometimes the ideal subwoofer volume setting for music is too loud for ﬁlms, while •

the ideal setting for ﬁlms is too quiet for music. When setting the subwoofer volume,

listen to both music and ﬁlms with strong bass content and ﬁnd a “middle ground”

volume level that works for both.

If your subwoofer always seems too loud or too quiet, you may want to place it in •

a different location. Placing the subwoofer in a corner will always tend to increase

its bass output, while placing it away from any walls or corners will always tend to

reduce its bass output.

AVR 1710/AVR 171 only: Listening in Zone 2

With the multizone system in use, you may enjoy an exciting 5.1-channel home theater

presentation in the main listening area, while others listen to an entirely different source in

another room. See Install a Multizone System, on page 19, for installation information.

You set up and activate the AVR’s multizone system from the on-screen Zone 2 menu.

Press the OSD/Menu button, and navigate to the Zone 2 line. Press the OK button to

display the Zone 2 menu.

Status: This line lets you turn Zone 2 on or off.

Source: This line lets you select the source input for Zone 2. You may select a different

source from the one currently operating in the main listening area. However, if the same

source has been selected for both the main listening area and Zone 2, listeners in both

areas will hear the same content.

Only analog audio sources are available to Zone 2. To hear digital devices such as a CD

player in Zone 2, follow these steps:

1. In addition to making a digital audio connection, connect the source device’s analog

audio outputs to the AVR. Make a note in Table A5 on page 39 to record which set of

analog inputs you used.

2. Use the AVR’s front-panel Audio Input button to select the analog audio input. (Leave

the Audio setting for the source device in the Source Setup menu set to the digital

input.)

Notes about listening in Zone 2:

Although you can listen to iPod or USB as a source in Zone 2, you cannot begin •

iPod or USB playback from within Zone 2. You must initially select iPod or USB as a

source in Zone 1 and begin playback of a track or playlist from there. Then you can

select iPod as the Zone 2 source and control playback from within Zone 2 even if you

switch Zone 1 to a different source.

Only one of the AVR’s internal sources (iPod, USB, vTuner, Network, AirPlay, DLNA •

DMR) can be active at a time across both zones. For example, if you are listening

to vTuner as the source in Zone 1 and switch the source in Zone 2 to USB, it will

switch the source in Zone 1 to USB(and vice versa). To listen to different sources in

Zone 1 and Zone 2 at the same time, at least one source must be one of the AVR’s

conﬁgurable external sources (Cable/Sat, Disc, STB or TV) that is connected to one

of the AVR’s analog audio inputs, or one of the AVR’s terrestrial radio sources (FM

or AM).

Volume: Highlight this line, and use the Left/Right buttons to control the volume in Zone

Assigned AMP: This line lets you assign the Assigned AMP channels to “Zone 2” for

multizone operation (see Number of Speakers, on page 31). When this line is set to Zone

2, you may conﬁgure the main listening room for only up to 5.1 channels.

To use the remote to control the sound in Zone 2, press the remote’s Zone 2 button. The

volume, mute and source select buttons will control the sound in Zone 2 and the Zone 2

button will illuminate whenever you press a button to indicate that the remote is in the

Zone 2 control mode. Press the Zone 2 button again to return the remote to the main

listening area control mode.

Listening in Zone 2

My harman kardon avr161 show device sleep. When I touch surr mode botton it show "Reset" but in few seconds shoW the same , device sleep Submitted on 23-4-2022 at 15:54
Reply Report abuse
My AVR 161 is displaying "Device sleep" what could be the problem and possible solution?
Thanks Submitted on 12-8-2020 at 20:11
Reply Report abuse
- Am un AVR 161,si apare pe ecran Device sleep si butonul de power se aprinde intermitent portocaliu''Ce ar putea avea defect?Multumesc Answered on 25-10-2021 at 12:38
  Vote up (2) Report abuse
My AVR 161 HARMAN sound device always displays "device sleep" each time I put it on. What could be the problem?
Thanks Submitted on 26-7-2020 at 14:07
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 161 in the language / languages: English as an attachment in your email.

The manual is 8,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 161

Harman Kardon AVR 161 Quick start guide - English - 11 pages

Harman Kardon AVR 161 User Manual - German - 52 pages

Harman Kardon AVR 161 User Manual - Dutch - 52 pages

Harman Kardon AVR 161 User Manual - Danish - 52 pages

Harman Kardon AVR 161 User Manual - French - 52 pages

Harman Kardon AVR 161 User Manual - Italian - 52 pages

Harman Kardon AVR 161 User Manual - Polish - 52 pages

Harman Kardon AVR 161 User Manual - Spanish - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 161 Manual

Product: