Manual Harman Kardon AVR 100 (page 10 of 36) (English)

498569

Zoom out

Zoom in

1/36

9 REAR-PANEL CONNECTIONS

Rear-Panel Connections

¡ AM Antenna: Connect the AM loop antenna

supplied with the receiver to these terminals. If an

external AM antenna is used, make connections

to the AM and GND terminals in accordance

with the instructions supplied with the antenna.

™ FM Antenna: Connect the supplied indoor or

an optional external FM antenna to this terminal.

£ Remote IR Input: If the AVR 100’s front-

panel IR sensor is blocked due to cabinet

doors or other obstructions, an external IR

sensor may be used. Connect the output of

the sensor to this jack.

¢ Remote IR Output: This connection per-

mits the IR sensor in the receiver to serve other

remote-controlled devices. Connect this jack to

the “IR IN” jack on compatible equipment.

∞ Subwoofer Output: Connect this jack to

the line-level input of a powered subwoofer. If

an external subwoofer amplifier is used, con-

nect this jack to the subwoofer amplifier input.

§ DVD Inputs: Connect the analog audio

outputs and composite video output of a DVD

or LD player to these jacks.

¶ CD Inputs: Connect these jacks to the out-

put of a compact disc player or CD changer.

• Tape Inputs: Connect these jacks to the

PLAY/OUT jacks of an audio recorder.

ª Tape Outputs: Connect these jacks to the

RECORD/INPUT jacks of an audio recorder.

‚ Video Monitor Output: Connect this jack

to the composite video input of a TV monitor or

video projector to view the output of any stan-

dard video source selected by the receiver’s

video switcher.

⁄ Speaker Terminals: Connect these termi-

nals to the appropriate speakers, following the

designations shown.

NOTE: When making connections to the

Speaker Terminals always be certain to maintain

correct polarity between the speaker’s terminals

and those on the AVR by connecting red (+)

terminals to red, and black (–) terminals to

black. (See page 13 for more information on

speaker polarity.)

¤ Switched AC Outlet: This outlet may be

used to power any device that you wish to have

turn on when the unit is turned on with the

System Power Control switch 2.

NOTE: The power consumption of the device

plugged into this outlet ¤ should not exceed

100 watts.

‹ AC Power Cord: Connect the AC plug to a

nonswitched AC wall output.

› Coaxial Digital Inputs: Connect the coax

digital output from a DVD player, HDTV receiver,

LD player or CD player to these jacks. The signal

may be either a Dolby Digital signal or a standard

PCM digital source.

ﬁ Optical Digital Input: Connect the opti-

cal digital output from a DVD player, HDTV

receiver, LD player or CD player to this jack.The

signal may be either a Dolby Digital signal or a

standard PCM digital source.

ﬂ Video 2 Inputs: Connect these jacks to

the audio and video outputs of a TV Tuner,

Cable TV converter box, satellite receiver or any

other audio/video source.

‡ Video 1 Inputs: Connect these jacks to

the audio and video PLAY/OUT jacks of a VCR.

° Video 1 Outputs: Connect these jacks to

the audio and video RECORD/IN jacks of a VCR.

· 6-Channel Direct Inputs: If an external

digital audio decoder is used, connect the out-

puts of that decoder to these jacks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 100 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 100 Manual

Product: