583650

Hapro Topaz Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
4
Assembly instructions
Before your appliance leaves the Hapro plants it is tested thoroughly and inspected for defects and damage. We request you when opening
the packaging to always check the appliance for external defects, imperfections or transport damage. Should it regrettably display defects or
omissions, please contact your dealer.
Your appliance should be installed carefully using these assembly instructions. You should also check whether the local power supply
corresponds to that stipulated on the type panel that is stuck to the back of your appliance.
We advise you not to use an extension cable, unless its electrical rating meets the requirements of the application. If the supply cord is
damaged, it must be replaced by the manufacturer or service agent or a similarly qualied person in order to avoid a hazard.
Do not place your appliance in a damp area and make sure that there is adequate ventilation. When in doubt consult your dealer.
After you have installed your appliance you should check that everything is functioning properly. The following options apply:
a. When your sun bed is tted with an electronic operating section (can be identied from the digital display), you can test the
appliance on the basis of the accompanying instructions.
b. When your appliance is tted with an electromechanical timer (can be identied from the turning knob or pointer), you can test the
appliance by turning the knob clockwise. The appliance can be switched o again by turning the pointer or knob back to “0”.
Note: Before the end of the tanning session, the machine will give a series of bleeps to alert you.
Usage
When your appliance is properly installed and functions properly it is ready for use.
Caution: before actually tanning you should familiarize yourself with the information in the accompanying booklet “sunny prospects”.
Defect
When your appliance does not operate as expected this may be due to a disturbance and/or defect. Before reporting this problem to your
dealer you should check whether the unit has been properly installed. The following situations apply:
a. Mechanical defect. Check whether your appliance has been properly installed by once more reading the assembly instructions.
b. Electrical defect. Try to correct the defect using the trouble-shooting guide below.
Note: Do not use your appliance when the ventilation is defective or is not functioning optimally, the timer is defective or the blue and/or
white lter glass of the optional face tanner is broken or missing.
Problem Possible solution
The appliance does not start. a. Check that the plug is properly connected to the wall socket power supply
b. Check that power is being supplied to the wall socket
The fuse blows in use a. Check the rating of the fuse. This should be: 16A slow
Some lamps do not burn a. Check for the lamp(s) involved the starter and switch using where necessary the starter from a
lamp that is functioning.
b. Check the de lamp(s), by swapping those that do not work with those that do.
Lamps burn dimly when the unit is
not in use
a. Reverse the switch to the power cable.
*When replacing parts you should always use original parts. Inquire for those with your dealer.
ENG (original instructions)
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hapro Topaz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hapro Topaz in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 1.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hapro Topaz

Hapro Topaz User Manual - English, German, Dutch, French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info