807626

Hapro Seecret C200 Manual

3
Zoom out
Zoom in
Previous page
1/32
Next page
- 3 -
Operation
Start
A Stand-alone mode:
By pressing start once the “+ and –“ buttons can be used to set the time. Pressing for a second time will start the unit.
Coin mode:
The unit can be started automatically by the external timer or the coin automat. The start button can be used only when the unit
has to be restarted from “pause”.
Stop
Stand-alone mode:
B Pressing stop once will cause the unit to “pause”. The lights will go out but the ventilation will continue to run.
Pressing stop twice will initiate a mandatory after-cooling phase of 3 minutes. The unit cannot be started during these 3 minutes.
Coin mode:
Pressing stop once will cause the unit to “pause”. The lights will go out but the ventilation will continue to run.
The unit will not respond to pressing stop several times. The external timer or coin automat will switch the unit o.
Switching o will initiate a mandatory after-cooling phase of 3 minutes. The unit cannot be started during these 3 minutes.
Illustration after-cooling
C Stand-alone mode:
a. Reduce sessiontime
b. Reduce body cooler speed
Coin mode:
a. Reduce body cooler speed
Stand-alone mode:
D a. Increase sessiontime
b. Increase body cooler speed
Coin mode:
a. Increase body cooler speed
No function
E
Fan
F Switch the body cooler on and o
General
The unit is generally set for use without external timer (stand-alone mode) or coin automat. When the unit has to operate in combination with
an external timer or a coin automat (coin mode), the internal time should be set to 0 minutes as per procedure below.
press continuously for 10 seconds
after 10 seconds press the “-“ button and continue to press until the display indicates “00”
press once and the unit will bleep in response.
Note: - The maximum session is restricted to 30 minutes.
- Note: Before the end of the session, the unit will give a series of bleeps to alert you.
Display messages
Overrule error (Switch print and/or display print defect)
Filter glass defect (Filter glass of the face tanner is broken or glass protection is defective)
Communication error (No communication between switch print and display print)
Note: When you receive one of the above error messages on your display, you should stop using the unit and remove the plug from the socket.
Contact your dealer.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hapro Seecret C200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hapro Seecret C200 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info