807645

Hapro Proline V Manual

4
Zoom out
Zoom in
Previous page
1/60
Next page
4
Model : XXXXX
Type : XXXXXXXX
Serial number : XXXXXXXXXX / 3
Rated voltage : XXXXXXXX
Rated power input : XXX W
Manufactured by:
VDL Hapro bv.
PO Box 73
4420 AC Kapelle, Netherlands
UV type 3 (Total Erythema output limited at 0,3W/m3)
28 x maxlight L 180W-R High Intensive
180-R-(97-129)/(8,1-10,9) Ballast: 160W
Lamp information
The lamps listed below are those that are installed as standard equipment at the factory. These standard lamps have been selected for
optimal tanning results and to match the UV classi cation of your tanning appliance. We recommend that when you replace a lamp you
only use lamps of the type currently installed in your tanning appliance and which are listed in the table below and on the identi cation
plate. If you choose to install a di erent type of lamp, you must only use lamps that are marked with an equivalent code which indicates
that the UV component falls within the equivalence range listed on the identi cation plate.
Lamps Art nr equivalent code UV type
maxlight L 100W-R CE III 12806 100-R-(22-29)/(2,7-3,7) 3
maxlight L 100W-R High Intensive 12808 100-R-(46-61)/(5,8-7,8) 5
maxlight L 160W-R CE 0,3 35378 160-R-(29-38)/(2,1-2,9) 2
maxlight L 180W-R High Intensive 22796 180-R-(97-129)/(8,1-10,9) 5
Note: The total erythema is limited to 0.3 W/m² for all UV types within the EU.
Note: The equivalent code is only applicable to low-pressure  uorescent lamps.
Example:
On the example identi cation plate shown the equivalent codes for the installed lamps are circled.
The equivalent code is 180-R-(97-129)/(8,1-10,9)
180 = the wattage of the lamp
R = the re ector type
(97-129) = the equivalence range for the total e ective erythema
(8,1-10,9) = the equivalence range for the NMSC ratio
Warning!
When it is necessary to replace the UV lamps, we recommend the use of original lamps of the type
prescribed on the identi cation plate. The use of other lamps increases the risk of technical problems with
the appliance that are not covered by the warranty. If you choose to replace lamps with non-original UV
lamps that have a matching equivalence code, it is important that you use lamps with identical technical
speci cations.
Warning!
The use of non-original VDL Hapro high-pressure lamps for facials will result in a danger of overheating or
other technical problems. The appliance might be damaged. Please consult the identi cation plate on the
appliance to determine which original VDL Hapro lamps are required.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hapro Proline V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hapro Proline V in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info