368880
9
Zoom out
Zoom in
Previous page
1/55
Next page
9
Operation
General:
The unit is generally set for use without external timer or coin automat (stand-
alone mode). When the unit has to operate in combination with an external timer
or a coin automat (coin mode), the internal time should be set to 0 minutes as per
procedure below.
depress continuously for 10 seconds
after 10 seconds depress the “-“ button and continue to press
until the display indicates “00”
press once and the unit will bleep in response.
Note: The maximum tanning session is restricted to 30 minutes.
A B C D E F
Operation
Start
Stand-alone mode:
By depressing start once the “+ and –“ buttons can be used to set the
tanning time. Pressing for a second time will start the unit.
Coin mode:
The unit can be started automa
tically b
y the external timer or the coin automat.
The start button can be used only when the unit has to be restarted from “pause”.
Stop
Stand-alone mode:
Pressing stop once will cause the unit to “pause”. The lights will go out
but the ventilation will continue to run.
Pressing stop twice will initiate a mandatory after-cooling phase of 3
minutes. The unit cannot be started during these 3 minutes.
Coin mode:
Pr
essing stop once will cause the unit to “pause”. The lights will go out
but the ventila
tion will continue to run.
The unit will not respond to pressing stop several times. The external
timer or coin automat will switch the unit off. Switching off will initiate a
mandatory after-cooling phase of 3 minutes. The unit cannot be started
during these 3 minutes.
Illustration after-cooling
Stand-alone mode:
a. Reduce tanning time
b
. Reduce body cooler speed
Coin mode:
a. Reduce body cooler speed
Stand-alone mode:
a. Increase tanning time
b
. Incr
ease body cooler speed
Coin mode:
a. Incr
ease body cooler speed
Face
Switch the face tanner on and off
Fan
Switch the body cooler on and off
Display messages:
Overrule error (Switch print and/or display print defect)
Filter glass defect (Filter glass of the face tanner is broken or glass
protection is defective)
Communication error (No communication between switch print
and display print)
Note: When you receive one of the above error messages on your LCD
display, you should stop using the unit and remove the plug from the
socket. Contact your dealer.
This symbol will appear on the lcd display after 500 tanning
hours. It is preferable after 500 tanning hours to replace the lamps
with new. After replacing the lamps reset the lamp hour counter.
Note: On the label on the back of the unit the lamps are stipulated that
are suitable for your unit.
Sundry:
Hour counter lamps x 10
Reset hour counter lamps
Hour counter sun bed x10
A
B
C
E
D
F
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hapro onyx 26 1 combi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hapro onyx 26 1 combi in the language / languages: Dutch as an attachment in your email.

The manual is 7,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info