711519
61
Zoom out
Zoom in
Previous page
1/70
Next page
Page EN-25
Installation, connection and commissioning
2. Check that the connection to the water
tap is sealed. Turn on the water tap slow-
ly and ensure that no water is escaping.
Then close the valve again.
Connecting the dishwasher to
the electricity
WARNING!
Risk of electric shock!
Faulty electrical installation or excessive
mains voltage may result in an electric
shock.
Prior to connecting the dishwasher,
ensure that you have page EN-6 tak-
en note of all the safety instructions
and adhered to them.
Fire hazard!
Never use multi-socket adapters,
multi-socket strips, travel adapters or
the like.
Depending on the recess into which the
dishwasher will be installed, the dishwasher
should be connected before or after installa-
tion.
For the electrical connection of the dish-
washer, a professional must install an
earthed power socket with its own fuse of a
sufficient size (220–240 V~ / 50 Hz / 10 A).
The plug must be installed in such a way
that the recess into which the dishwasher
will be fitted is deep enough even when the
plug is plugged in.
Do not use a multi-socket extension cable,
multi-socket plug, travel adapter, extension
cable or similar.
We recommend using a pulse-sensitive re-
sidual current device (RCD).
Connect the mains plug to the socket.
Substructure
If you are setting up your dishwasher as a
freestanding appliance, continue with „De-
gree of water hardness“ on page EN-27.
NOTICE
Risk of damage!
Selecting the wrong screws can dam-
age the worktop.
Select the correct screws with the ap-
propriate screw length.
Use the enclosed screws.
Requirements:
Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
Maintain sufficient distance from the walls
and adjacent appliances. The recess di-
mensions must at least correspond to the
details in the diagram above, ‘recess di-
mensions’.
1. If you have not already done so, remove
cardboard, polystyrene and adhesive
strips from the inside of the dishwasher.
2. Loosen both screws on the reverse side
of the covering panel and remove them.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP8-T7636E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-T7636E in the language / languages: English, German as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info