711519

Hanseatic WQP8-T7636E Manual

53
Zoom out
Zoom in
Previous page
1/70
Next page
Page EN-17
Dishwasher operation
Preparation
Requirements:
– You have read chapter „Safety“ on page
EN-6 and understand all the safety notices.
– The appliance is set up and connected as
described in chapter „Installation, connec-
tion and commissioning“ on page EN-23.
– Dishwasher detergents, rinse aids and
dishwasher salts and multitabs are added.
1. Open the tap completely.
2. Close the dishwasher door.
3. Press the
button (18) to switch on the
dishwasher.
4. You will hear a signal tone and all LEDs
will illuminate briefly.
After a short time, the programme display
reading ECO (1) will show.
Selecting the dishwasher
programme
It is recommended that you carry out
a test run before the fi rst dishwasher
cycle in order to remove residues from
the manufacturing process and in order to
ensure that the appliance functions perfectly.
Carry out this test run when the dishwasher
is empty and without any dishwasher deter-
gent.
1. Select the suitable dishwashing pro-
gramme based on the “dishwasher pro-
gramme table”, see page EN-16.
(13)(6)
(1)
2. Press the P (13) button as often as re-
quired until the display shows the desired
programme symbol (1) and the pro-
gramme duration (6).
3. For the washing programme,
– if you wish to make further adjustments,
continue with „Additional options“.
– launch it, continue with „Starting the
dishwashing programme“ on page EN-18.
Additional options
You can combine the various dishwashing
programmes with additional options. The
additional options must be selected before
starting the wash programme.
Intensive cleaning
(7)(17)
This option allows you to fur-
ther improve the cleaning results.
This option is not available with the pro-
grammes
, and .
• To switch the option
– on, press the button
(17).
In the display, the symbol (7) will light
up.
– off, press the button again. The symbol
will disappear in the display.
Dishwasher operation
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP8-T7636E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-T7636E in the language / languages: English, German as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info