Manual Hanseatic WQP8-J7710E (page 57 of 64) (English, German)

711501

Zoom out

Zoom in

1/64

Page EN-25

Installation and assembly

Connecting the dishwasher to

the electricity

WARNING

Risk of electric shock!

Improper handling of the network connec-

tion may result in an electric shock or short

circuit.

■ Never connect dishwashers to mul-

ti-socket adapters, multi-socket strips,

travel adapters or the like.

■ We recommend using a pulse-sensitive

residual current device (RCD).

• Insert the mains plug in the properly in-

stalled socket (220–240 V~ / 50 Hz, 10 A).

Degree of water hardness

Hard water will cause calcification within the

dishwasher. Also, more dishwasher deter-

gent will be required to clean the dishes. Soft

water increases foaming. For this reason, the

degree of hardness of the water has to be

determined and adjusted even before the first

use.

Determining the degree of hardness

– Take the degree of hardness from the wa-

ter bill or

– ask your local water company for the de-

gree of hardness or

– determine the degree of hardness using

the enclosed test strip (see table for result):

Test result

Water

hard-

ness

°dH Setting

soft

up to

8.4

medium

8.5

to 14

hard

than

Setting the degree of hardness

(1) (6) (9)

1. Close the dishwasher door.

2. Switch on the dishwasher with button (1)

. An audible alarm will sound and the

display (6) will light up.

3. Within a minute after switching on, press

and hold button (9) until the display (6)

shows the setting for the degree of hard-

ness (K1 to K6) and the symbols and

light up alternately.

4. Press button (9) for so long until the

desired degree of hardness is shown.

Around 5 seconds after you last pressed

the button, the display changes to the

standard display. Your settings are saved.

If the washing result is not satisfactory, set the

next rinse cycle to a higher or lower degree

of hardness.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-J7710E in the language / languages: English, German as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hanseatic WQP8-J7710E Manual

Product: