711501

Hanseatic WQP8-J7710E Manual

54
Zoom out
Zoom in
Previous page
1/64
Next page
Page EN-22 Installation and assembly
Choose a suitable location
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The dishwasher must be positioned be-
neath a full work surface which is joined
together with the cupboards adjacent to the
dishwasher.
– In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin.
– The measurements of the recess must at
least correspond to the details in the follow-
ing diagram.
90 °
90 °
600 m m
820mm
100
580mm
80
Inlet/outlet area
and electrical con-
nection.
820 mm
450 mm
90° 90°
580 mm
80 mm
100 mm
CAUTION!
Risk of injury!
Improper handling of the appliance may
result in injury.
■ The appliance is heavy and bulky. Seek
the help of another person during trans-
port, installation and assembly.
■ If a trolley is used to move the appliance,
the appliance must be moved as shown
on the packaging.
■ Only lift the appliance as shown on the
packaging.
Installation and assembly
■ Remove all obstacles on the transport
route and from the installation location,
e.g. open doors and clear away objects
lying on the fl oor.
Having the outlet hose
connected
Specific technical measures are required to
connect the outlet hose (25) to the trap (si-
phon) of your washbasin/sink. For this rea-
son, only plumbing experts or members of
our service department may connect (see
„Service department“ on page EN-30) the out-
let hose (25).
NOTICE
Potential malfunction!
Failing to connect the appliance correctly
may cause malfunctions during operation.
■ Make sure that the waste water can drain
freely at any time. To do this, the drain-
age cross-section must be at least 40
mm.
■ Make sure that there are no kinks in or
damage to the outlet hose.
■ Make sure that the end of the hose is not
submerged in the pumped water.
■ Do not extend the outlet hose or replace
with another drainage pipe.
Connect the outlet hose’s outlet as follows:
Ø 40 mm
max. 1000 mm
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP8-J7710E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-J7710E in the language / languages: English, German as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info