711503
63
Zoom out
Zoom in
Previous page
1/67
Next page
Page EN-29
Troubleshooting table
Problem Possible cause Solution
The
LED (13) is illu-
minated although dish-
washer salt has been
added.
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the
end of a spoon or similar.
The water is not running
or it is running only very
slowly.
There is a kink in the inlet
hose.
Lay out the inlet hose in such a
manner that it is not kinked.
The water tap is not properly
on.
Turn the water tap on completely.
The water is not running
off or only very slowly.
The filters are blocked. Clean the filters (see page EN-20).
The outlet hose is kinked, has
been extended or is hanging
too high up/too low.
Lay out the outlet hose in the prop-
er manner (see page EN-22).
The dishwasher is not
watertight.
The door seal is defective. Have the door seals replaced (see
„Service“ on page EN-31).
The outlet hose or the inlet
hose is defective.
Have the defective hose replaced
(see „Service“ on page EN-31).
The dishwasher can be
switched on/off, but not
cannot be operated.
The dishwasher can only be
operated when the door is
closed.
Close the door.
The dishwasher cannot
be operated.
The buttons are locked. Unlock the buttons (see „Button
lock“ on page EN-18).
Error indicators
Code Solution
flashing rapidly
It takes too long for the
water to fill up.
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked (see „Connect-
ing the inlet hose“ on page EN-23).
Ensure that the water pressure is correct. See „Technical specifica-
tions“ on page EN-32.
flashing rapidly
Water overflow
Switch off the tap. Find the gap in the seal (or have someone find it)
and repair the leak (or have it repaired).
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP8-7736B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-7736B in the language / languages: English, German as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info