711503
51
Zoom out
Zoom in
Previous page
1/67
Next page
Page EN-17
Dishwasher operation
Preparation
1. Open the valve completely.
2. Close the dishwasher door.
3. Press the button (1) to switch on the
dishwasher.
You will hear a signal tone and all LEDs
will illuminate briefly.
After a moment, the ECO programme
LED will light up.
Select the wash programme
and start
1. Search for the appropriate dishwasher
programme with the help of the “dish-
washer programme table”, see page
EN-16.
(9) (10)
2. Press the P button (9) repeatedly until
the LED to the right of the desired pro-
gramme symbol lights up.
3. Press the button (10) to start the wash
programme.
The LED to the right of the programme
symbol will flash while the programme is
running.
4. Once the programme has finished, a
signal tone will sound and the LED to the
right of the programme symbol will stop
flashing.
Now turn off the water tap and press the
button (1) to switch off the dishwasher.
5. Wait a little while before unloading the
dishes.
Additional options
You can combine the various dishwashing
programmes (6) with additional options. The
additional options must be selected before
starting the wash programme.
Delayed start
The wash cycle normally starts as soon as
you press the button (10). However, you
can delay the start of the programme by 3, 6
or 9 hours.
(8)
(10)
1. Press the “Delayed start” button (8) re-
peatedly until the LED to the left of the
desired delay lights up.
2. Press the button
(10).
The LED to the left of the delay will now
flash.
The programme will start as usual after
the delay period has finished.
Half load
Select the “Half load” option if you would like
to run the dishwasher with 6 place settings
or less. This additional option reduces water
and power consumption.
Dishwasher operation
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP8-7736B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-7736B in the language / languages: English, German as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info