Manual Hanseatic WQP8-7736B (page 43 of 67) (English, German)

711503

Zoom out

Zoom in

1/67

Page EN-9

Safety

Trip hazard!

If the door of the appliance is left open,

this rapidly becomes a tripping hazard.

■ Close the door after every use.

■ Only leave the door slightly open to

cool down.

Risk of damage!

Improper handling of the appliance

may result in damage.

■ Never leave the appliance unsuper-

vised for an extended period when

the tap is on.

■ During storms or when going on hol-

iday, always withdraw the mains plug

from the socket and close the water

tap.

■ If there is a risk of frost, loosen the in-

let hose and allow the water to run

off.

■ Only use regenerating salt which is

suitable for dishwashers.

■ Only add dishwasher salt immediate-

ly before the next main dishwashing

cycle, as dishwasher salt which has

overﬂ owed can damage the seals and

ﬁ lters of the appliance.

■ Immediately remove any spilt dish-

washer salt with a damp towel, as

otherwise the stainless steel surfaces

can be affected.

■ Ensure that the dishwashing deter-

gent and rinse aid are suitable for the

appliance.

■ Wipe away rinse aid which has over-

ﬂ owed immediately as otherwise it

can lead to excessive foaming which

can compromise the results delivered

by the dishwasher.

■ Do not overload the appliance.

■ Position the upper dish rack at the

highest setting if very tall dishes are in

the lower dish rack, as otherwise the

upper spraying arm will be blocked.

The seals of the door are sensitive to oil

and grease.

■ Do not apply grease to the door seals.

The door seals can be damaged by un-

suitable cleaning agents.

■ Do not use harsh, aggressive, sol-

vent-based or abrasive cleaners.

The appliance is designed for a water

pressure of 0.4-10 bar (0.04-1.00 MPa,

40-100 N/cm

■ If the water pressure is higher than

this, install a pressure reducer. If in

doubt, enquire about the water pres-

sure with the water supply company.

■ Never connect the appliance to the

water tap or the mixing arm of a wa-

ter heater (continuous ﬂ ow heater,

pressure-free boiler etc.).

■ Ensure that the inlet hose is not

kinked and is carefully connected.

■ Do not cut through the inlet hose.

It contains electrical components. If

the inlet hose is damaged, have it re-

paired by a specialist.

■ Do not use old or previously installed

inlet or outlet hoses.

■ The outlet hose must be of a mini-

mum diameter of 40mm so that the

water can be pumped away unhin-

dered.

■ Do not attach the outlet hose yourself,

have it installed by a specialist plumb-

er. Have the outlet hose checked reg-

ularly for damage or kinks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-7736B in the language / languages: English, German as an attachment in your email.

The manual is 3,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hanseatic WQP8-7736B Manual

Product: