711511
59
Zoom out
Zoom in
Previous page
1/70
Next page
Page EN-23
Installation, connection and initial commissioning
Choosing a suitable location
CAUTION!
Risk of injury!
The appliance is heavy and bulky. Im-
proper handling of the appliance may
result in injury.
Seek the help of another person dur-
ing transport, installation and assem-
bly.
If a trolley is used to move the appli-
ance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
the packaging.
Remove all obstacles on the transport
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
The location must be a dry and frost-safe
room with a firm ground.
In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin or the floor drain.
Having the outlet hose
connected
NOTICE
Malfunction!
Failing to connect the appliance cor-
rectly may cause malfunctions during
operation.
Make sure that the waste water can
drain freely at any time. To that end,
the outlet pipe must have a minimum
diameter of 40mm.
Installation, connection and initial commissioning
Ensure that there are no kinks or dam-
age to the outlet hose.
Make sure that the end of the hose is
not submerged in the pumped water.
Do not extend the outlet hose or re-
place with another drainage pipe.
Ø ≥ 40 mm
max. 1000 mm
You can connect the end of the outlet hose in
two different ways:
Connection to a floor drain.
Direct connection to the odour seal (si-
phon) of your washing/dishwashing basin.
Technical measures are required for this.
For this reason, only plumbing experts or
members of our service team may connect
the outlet hose (see page EN-32). The out-
let hose must be a maximum of 1000 mm
above the floor.
Connecting the inlet hose
NOTICE
Risk of damage!
The dishwasher is designed for a water
pressure of 0.4bar to 10bar (0.04MPa
to 1.0 MPa, 40 to 100 N/cm²). Water
must always be able to run freely into
the dishwasher, otherwise this can
damage the appliance.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP8-7714I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-7714I in the language / languages: English, German as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info