711511
53
Zoom out
Zoom in
Previous page
1/70
Next page
Page EN-17
Dishwasher operation
Preparation
Requirements:
You have read chapter „Safety“ from page
EN-6 and understand all the safety notices.
The appliance is set up and connected as
described in chapter „Installation, connec-
tion and initial commissioning“ from page
EN-23.
Dishwasher detergent, rinse aid and dish-
washer salt and multitabs are added.
1. Open the tap completely.
2. Open the dishwasher door.
3. Press the
(8) button to switch on the
dishwasher.
You will hear a signal tone and all LEDs
will illuminate briefly. The LED (7) lights up
continuously and the display shows "
– ¦ – –".
Selecting the dishwasher
programme
It is recommended that you carry out
a test run before the rst dishwasher
cycle in order to remove residues from
the manufacturing process and in order to
ensure that the device functions perfectly.
Carry out this test run when the dishwasher
is empty and without any dishwasher deter-
gent.
1. Select the suitable dishwashing pro-
gramme based on the “dishwasher pro-
gramme table”, see page EN-16.
2. Press the (13) button of the desired pro-
gramme.
The LED (1) of the selected programme
is illuminated, and the display (2) shows
the duration of the selected programme
(for example with the Eco programme:
3:10).
3. If you
would like a delayed programme, please
refer below to “Delayed start”.
would like a particularly dry result, please
select the option “Extra dry” (please see
below)
have only loaded the dishwasher half full
or with less than 6 place settings, please
select the option “Half load” (please see
below).
launch it, continue with „Having the out-
let hose connected“ on page EN-23.
Delayed start
The washing cycle will normally begin as
soon as the dishwasher door has been
closed.
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
Dishwasher operation
(1)
(8)(9)(10)(11)(13)
(2) (6)(5) (7)
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP8-7714I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP8-7714I in the language / languages: English, German as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info