711497
71
Zoom out
Zoom in
Previous page
1/80
Next page
Page EN-29
Installation, connection and commissioning
(h)
(h)
12. Lay the enclosed drilling template on the
back of the front panel in such a way
that the drilling template and the front
panel are flush at the top.
13. Transfer the drill holes from the drill tem-
plate to the front panel.
14. Drill the marked hole positions using a
Ø 2 mm drill bit.
15. Remove the protective films from the
other Velcro straps and stick the velcro
straps to the front panel using the drilling
template.
16. Fix the front panel to the dishwasher
door using the Velcro straps (h) hold it
firmly and carefully open the door.
(k)
(k)
17. Remove the 4 screws from the inside of
the door. Screw the front panel in place
at these positions using the 4 enclosed
screws (k).
You have now fitted the front panel.
Adjusting the opening of the
door
You can adjust how easy or diffi cult it
is to open the dishwasher door. This
setting is often required after the front
panel has been mounted. You can
change the spring force of the door by
turning both lower screws.
To adjust the door
so that it is easier to open, turn the screws
in an anti-clockwise direction.
so that it is more difficult to access, turn the
screws in a clockwise direction.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP12-T7735E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP12-T7735E in the language / languages: English, German as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info