711498

Hanseatic WQP12-7713I Manual

53
Zoom out
Zoom in
Previous page
1/70
Next page
Page EN-17
Dishwasher operation
Preparation
Requirements:
– You have read chapter „Safety“ on page
EN-6 and understand all the safety notices.
– The appliance is set up and connected as
described in chapter „Installation, connec-
tion and initial commissioning“ on page
EN-23.
– Dishwasher detergent, rinse aid and dish-
washer salt and multitabs are added.
1. Open the tap completely.
2. Open the dishwasher door.
3. Press the
button (7) to switch on the
dishwasher.
You will hear a signal tone, all LEDs will
illuminate briefly. The LED (6) will light up
continuously and the display will show
“
– ¦ – –”.
Selecting the dishwasher
programme
It is recommended that you carry out
a test run before the fi rst dishwasher
cycle in order to remove residues from
the manufacturing process and in order to
ensure that the device functions perfectly.
Carry out this test run when the dishwasher
is empty and without any dishwasher deter-
gent.
1. Select the suitable dishwashing pro-
gramme based on the “dishwasher pro-
gramme table”, see page EN-16.
2. Press the (12) button of the desired pro-
gramme.
The (1) LED of the desired programme
will light up and the display (2) will show
the duration of the selected programme.
(For example, for the Eco programme:
3:10).
3. If you
– want to delay the start of a programme,
please see “start delay” below.
– want to get particularly dry results,
please use the “extra dry” option (see
below)
– have only loaded the dishwasher half
full or with fewer than 6 place settings,
please use the “Half load” option.
– launch it, continue with „Starting the
dishwashing programme“ on page EN-18.
Delayed start
The washing cycle will normally begin as
soon as the dishwasher door has been
closed.
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
• Press the button (10) as many times
as necessary for the display (2) to show
the delay required (H:00, H:01 to H:24).
Dishwasher operation
(1)
(7)(8)(9)(10)(12)
(2) (4) (5) (6)
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic WQP12-7713I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP12-7713I in the language / languages: English, German as an attachment in your email.

The manual is 5,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info