Manual Hanseatic WQP12-7635 (page 58 of 66) (English, German)

711493

Zoom out

Zoom in

1/66

Page EN-24 Setup or under-worktop installation and connection

earthed power socket with its own fuse of

a sufficient size (230 V~/50 Hz/10 A).

– The plug must be installed in such a way

that the recess into which the dishwasher

will be fitted is deep enough even when the

plug is plugged in.

– Do not use a multi-socket extension cable,

multi-socket plug, travel adapter, extension

cable or similar.

– We recommend using a pulse-sensitive re-

sidual current device (RCD).

• Connect the mains plug to the socket.

Substructure

NOTICE

Risk of damage!

Selecting the wrong screws can dam-

age the worktop.

■ Select the correct screws with the ap-

propriate screw length.

■ Use the enclosed screws.

59.8 cm

60.0 cm

84.5 cm

Requirements

– Only install the dishwasher underneath a

continuous worktop which is joined to the

units adjacent to the dishwasher.

– Maintain sufficient distance from the walls

and adjacent appliances. The measure-

ments of the recess must at least corre-

spond to the details in the diagram above.

1. Remove cardboard, polystyrene and ad-

hesive strips from the inside of the dish-

washer, if you have not already done so.

2. Loosen both screws on the reverse side

of the covering panel and remove them.

(c)

3. Affix the enclosed condensation-protec-

tive film (c) to the bottom of the work sur-

face. In this way, you will avoid damage to

the work surface as a result of hot steam

which may be emitted from the dishwash-

er if the dishwasher door is left open.

4. Place the dishwasher in the desired posi-

tion.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP12-7635 in the language / languages: English, German as an attachment in your email.

The manual is 4,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hanseatic WQP12-7635 Manual

Product: