711766
16
Zoom out
Zoom in
Previous page
1/24
Next page
BedienungSeite 16
Abschaltverzögerung
einstellen
Ihre Dunstabzugshaube ist mit einer Ab-
schaltverzögerung ausgestattet, die es Ihnen
erlaubt, das Gerät so einzustellen, dass es
sich nach einer wählbaren Zeit selbsttätig ab-
schaltet.
Eine Einstellung der Abschaltverzöge-
rung ist nur nöglich, wenn das Gerät
eingeschaltet ist.
Eine Einstellung der Abschaltverzögerung
bleibt nicht erhalten, wenn das Gerät aus-
geschaltet wird.
1. Berühren Sie den Timer-Sensor (14)
.
Im Display blinkt die Anzeige 05.
2. Berühren Sie den Slider (16) auf dem Bal-
ken, der der gewünschten Abschaltverzö-
gerungszeit entspricht:
Balkenzahl Verzögerungszeit
(Minuten)
15
210
315
420
525
630
735
840
Die entsprechende Anzeige blinkt im
Display.
3. Berühren Sie den Timer-Sensor (14)
erneut
Im Display leuchtet die Anzeige der Ab-
schaltverzögerung.
Die Zeitanzeige zählt in Minutenschritten
rückwärts, ab einer Restzeit von einer Mi-
nute in Sekundenschritten.
Wird der letzte Arbeitsschritt nicht aus-
geführt, hört die Anzeige nach ca. 5
Sekunden auf zu blinken und leuchtet.
Die Abschaltverzögerung ist dann ebenfalls
eingestellt.
Beleuchtung
WARNUNG
Verletzungsgefahr!
Sollte eine der LEDs nicht mehr funk-
tionieren, darf sie nur von einem au-
torisierten Servicetechniker ausge-
wechselt werden.
Ihre Dunstabzugshaube ist mit einer
LED-Lampe ausgestattet. Die Beleuchtung
schaltet sich ein, wenn das Gerät über den
Sensor (18) eingeschaltet wird.
Um die Beleuchtung ein- oder auszuschal-
ten, berühren Sie den Sensor (15)
.
Beleuchtungsstufe einstellen
Beim Einschalten des Geräts ist die Beleuch-
tung auf die höchste Stufe eingestellt. Sie ha-
ben jedoch zwei Möglichkeiten, die Beleuch-
tungsstufe verändern.
– über den Sensor (15)
1. Berühren Sie den Sensor (15) .
Die Beleuchtung schaltet sich aus.
2. Berühren Sie den Sensor (15)
erneut.
Im Display blinkt die Anzeige L8.
3. Berühren Sie den Slider (16) auf dem Bal-
ken, der der gewünschten Beleuchtungs-
stufe entspricht.
Die Anzeige der gewünschten Beleuch-
tungsstufe blinkt.
4. Berühren Sie den Sensor (15)
.
Die Anzeige der gewünschten Beleuch-
tungsstufe leuchtet.
Damit ist die Beleuchtungsstufe geändert.
Wird der letzte Arbeitsschritt nicht aus-
geführt, hört die Anzeige nach ca. 5
Sekunden auf zu blinken und leuchtet.
Die Beleuchtungsstufe ist dann ebenfalls ein-
gestellt.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic SY-3503C5-E32-C45-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic SY-3503C5-E32-C45-600 in the language / languages: German as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info