711824
42
Zoom out
Zoom in
Previous page
1/52
Next page
OperationPage GB-16
Setting the switch-off delay
Your exhaust hood is equipped with a switch-
off delay, which allows you to set the device
so that it shuts off automatically after a se-
lected time.
The switch-off delay can only be set if
the appliance is switched on.
Switch-off delay settings are not maintained
when the appliance is switched off.
1. Press the timer sensor (14)
. The 05 in-
dicator flashes on the display.
2. Touch the slider (16) on the bar that cor-
responds to the desired switch-off delay
time:
Number of
bars
Delay (minutes)
15
210
315
420
525
630
735
840
The corresponding indicator flashes on
the display.
3. Press the (14) timer sensor
again. The
switch-off delay indicator lights up on the
display. The time display counts back-
wards in minutes, and in seconds where
there is a remaining time of one minute.
If the last step is not carried out, the
indicator will stop ashing after
approx. 5 seconds and light up. The switch-
off delay is then also set.
Lighting
The exhaust hood is equipped with an LED
light. The light turns on when the appliance is
turned on via the sensor (18) .
To switch the lighting on or off, touch the
sensor (15)
.
Setting the light level
When the appliance is switched on, the light-
ing is set to the highest level. However, there
are two ways to change the lighting level.
– via the sensor (15)
1. Touch the sensor (15) . The light
switches itself off.
2. Touch the sensor (15)
again. The L8
indicator flashes on the display.
3. Touch the slider (16) on the bar that cor-
responds to the desired lighting level. The
desired lighting level indicator will flash.
4. Touch the sensor (15)
. The desired
lighting level indicator will light up.
This changes the lighting level.
If the last step is not carried out, the
indicator will stop ashing after
approx. 5 seconds and light up. The lighting
level is then also set.
– via the sensor (17)
1. Touch the sensor (17) . The fan shuts
off; the L8 indicator will appear on the dis-
play.
2. Touch the slider (16) on the bar that cor-
responds to the desired lighting level. The
desired lighting level indicator will flash.
3. Touch the sensor (17) . The desired
lighting level indicator will light up.
4. Touch the sensor (17)
again. The fan
level indicator appears and the fan starts.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic SY-3503C5-E15-C44-L191-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic SY-3503C5-E15-C44-L191-600 in the language / languages: English, German as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info