711361
63
Zoom out
Zoom in
Previous page
1/72
Next page
Page GB-27
Installing and connecting the washing machine
2. Screw the other end of the supply hose
hand-tight onto the water valve.
3. Open the valve completely and check
whether the connections on the appliance
and on the valve are sealed.
4. Then close the valve again.
Creating an electrical
connection
WARNING!
Risk of electric shock!
Touching live parts may result in severe
injury or death.
Do not put into operation if the
mains cord is faulty or the appliance
displays other visible damage.
Do not operate the appliance with an
external timer or a separate remote
control system and do not connect to
a multi-socket.
Insert the mains plug into an easily acces-
sible, properly installed and fused earthed
socket (220-240 V, 50 Hz, 10 A).
Carry out a test run
The appliance requires an initial wash cycle
without laundry, but with detergent. The aim
of this is to rinse out possible residues from
production.
Requirements
You have read the “Safety” chapter from
page GB-4 and understand all the safety
instructions.
The transportation packaging is removed
and the appliance is prepared as described
in chapter “Installing and connecting the
washing machine” on page GB-23.
The inlet hose (b) and the outlet hose (15)
are properly connected.
Any residual water merely indicates that
the washing machine function was fac-
tory tested.
1. Check whether the inlet hose (b) and the
outlet hose (15) are securely connected.
2. Open the valve completely.
3. Make sure that the drum is empty.
4. Push the appliance door tightly closed.
M
A
X
M
A
X
(31)
Liquid detergent Powder detergent
5. Adjust the partition (31) depending on the
detergent you are using.
6. Dispense detergent into the left chamber
II in accordance with the manufacturer
instructions.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HWMB814A3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HWMB814A3 in the language / languages: English, German as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info