711371
52
Zoom out
Zoom in
Previous page
1/89
Next page
Safety
Page EN-7
it starts smoking or there is a smell
of burning,
it makes unfamiliar noises.
In such cases, pull out the mains
plug or unscrew/isolate the fuse and
contact our service department (see
pageEN-41).
The appliance corresponds to protec-
tion class I and may only be connect-
ed to a plug with a protective conduc-
tor that has been properly installed.
When connecting, make sure that the
voltage is correct. You can find more
detailed information about this on
the nameplate.
Do not connect to a timer or a sepa-
rate remote-controlled system for dis-
tance monitoring and control.
The appliance must only be com-
pletely disconnected from the power
supply by pulling out the mains plug.
The appliance must therefore be con-
nected to an easily accessible socket
so that it can be quickly disconnected
from the power supply in the event of
breakdown.
If the mains plug is no longer acces-
sible after installation, an all-pole dis-
connecting device complying with
overvoltage category III must be
connected to the house wiring with a
contact gap of at least 3 mm; this in-
cludes fuses, circuit breakers and con-
tactors.
Wall mounting of the water filter may
only be carried out by an expert.
Please ensure when mounting the
water filter to the wall that
the wall is capable of bearing the
weight,
there are no cables or pipes in the
drilling areas. Before you drill, use a
metal detector to check the appli-
cable areas.
Do not kink or pinch the mains cable
or lay it over sharp edges. This can re-
sult in a break in the cable.
When installing the appliance, please
ensure that the mains cable does not
become pinched or damaged.
Do not locate multiple portable sock-
et-outlets or portable power supplies
at the rear of the appliance.
Please do not position extension
leads or portable power supply units
at the back of the unit.
Always hold the mains plug itself, not
the mains cable.
Never touch the mains plug with wet
hands.
Keep the appliance, mains plug and
mains cable away from naked flames
and hot surfaces.
Never immerse the mains cable or
plug in water or any other liquids.
If the mains cable of the appliance is
damaged, it must be replaced by the
manufacturer, through the customer
service department or by a qualified
specialist.
Inspections and repairs to the appli-
ance may only be carried out by au-
thorised specialists (see „Service“ on
pageEN-41).
Independent repairs made to the ap-
pliance may cause damage to prop-
erty and personal injury, and any li-
ability and warranty claims will be
forfeited. Never try to repair a defec-
tive or suspected defective appliance
yourself.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HSBS17990WETA2I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HSBS17990WETA2I in the language / languages: English, German as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info