711931
42
Zoom out
Zoom in
Previous page
1/48
Next page
Start-upPage GB-18
1
0
5
4
3
2
(8)
Remove the polystyrene block (8) at the
rear of the appliance.
Changing the door hinges
You can change the side on which the door
opens. The door hinge is on the right upon
delivery.
As this alteration requires some manual skills,
please read through the work instructions be-
fore altering.
In addition to the package contents, you will
require:
a medium sized cross-slotted screwdriver,
a fine flat-headed screwdriver,
a 10 mm wrench or combination wrench,
the assistance of another person, where
possible.
1. Ensure that the appliance is not connect-
ed to the power supply.
(11)
(12)
(13)
(14)
(15)
2. Using a flat-head screwdriver, carefully
pry out the blind covers (11) and (12) on
the top of the appliance and the blind
plugs (13) on the door frame.
3. Loosen the three screws (14) on the up-
per hinge (15), and remove these. As a
precaution hold the door itself with one
hand, or please ask a second person to
hold the door.
4. Remove the upper hinge (15).
5. Lift the door from the lower hinge, and set
aside.
6. Tilt the appliance backwards slightly, and
rest it against a wall.
(3)
7. Unscrew both feet (3).
(16)
(17)
8. Loosen both screws (16) on the lower
hinge (17) and remove.
(19)
(18)
(20)
9. With the wrench, loosen the nuts (19),
and remove the pin screw (18). In do-
ing so, ensure you do not lose the snap
ring (20).
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HMGS5144A1S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HMGS5144A1S in the language / languages: English, German as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info