711223

Hanseatic HGT14283A2 Manual

49
Zoom out
Zoom in
Previous page
1/54
Next page
Troubleshooting tablePage EN-22
Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
■ Never try to repair a defective or suspected defective appliance yourself. You can
put your own and future users’ lives in danger. Only authorised specialists are al-
lowed to carry out this repair work.
■ If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualifi ed persons in order to avoid a hazard.
Problem Possible cause Solutions, tips, explanations
Compressor off,
light off.
No electricity to socket. Check the socket with another appliance.
Check the fuse.
Mains plug is loose. Check the tightness of the mains plug.
Compressor off,
light on.
Temperature controller (11)
is set to ‘OFF’.
Turn the temperature controller to a higher
position (see „Setting the temperature“ on
page EN-12).
Desired temperature has
been reached.
Further cooling not required. When the in-
side temperature increases, the compres-
sor automatically switches on again.
Appliance cools
too quickly.
The temperature controller
(11) is set too high.
Select a lower setting (see „Setting the
temperature“ on page EN-12).
The appliance
doesn’t cool suffi-
ciently.
The temperature controller
(11) is set too low.
Select a higher setting (see „Setting the
temperature“ on page EN-12).
Lid not tightly closed or lid
seal is not completely tight.
See ‘Checking and cleaning the lid seals’
on page EN-16.
The appliance is near a heat
source.
Place insulation plate between the appli-
ances or change location.
Food has been stored warm. Only store cooled foods.
Too many goods frozen. Please observe the maximum freezer ca-
pacity (see ‘Freezing capacity in kg/24h’
in the data sheet at the end of this user
manual).
Ambient temperature too low
or too high.
Adjust the ambient temperature to the
climate class (see ‘Climate classes’ in the
product data sheet at the end of this user
manual).
Compressor seems defec-
tive.
Set the temperature controller to “6”. If the
compressor does not switch on within an
hour, please contact our Service depart-
ment (see page EN-24).
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HGT14283A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HGT14283A2 in the language / languages: English, German as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info