713573
61
Zoom out
Zoom in
Previous page
1/72
Next page
If you would like to reduce these distances,
you can fit an insulation plate between the
appliances.
If underfloor heating is installed at the set-
up location, place the appliance on an insu-
lation plate made from solid material.
Setting up and aligning the
appliance
NOTICE
Risk of damage!
Insuffi cient air circulation may lead to
overheating and cause damage to the
appliance.
The entire space above the appliance
must remain clear.
The appliance should not stand di-
rectly against the wall (leave a mini-
mum clearance of 5cm).
1. Place the appliance on as flat and as firm
a base as possible.
2. Check the position with a spirit level.
(
14
)
3. Level out any unevenness on the ground
using the two front screw feet (14).
Close the door.
Tilt the appliance backwards slightly and
screw in/unscrew the screw feet (14).
Stand the appliance back up again and
check the alignment with a spirit level.
Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the door.
Attaching the door handle
If you wish, you can now attach the door han-
dle.
(15)
1. Use a knife or a flat-tip screwdriver to re-
move the blind plugs (15) from the side of
the door.
(9)
(16)
2. Secure the door handle (9) with the
screws provided (16).
Start-up
Page GB-25
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HGS18560DA2I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HGS18560DA2I in the language / languages: English, German as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info