Manual Hanseatic HGS 8555A2S (page 43 of 52) (English, German)

711939

Zoom out

Zoom in

1/52

Start-up

Page EN-17

Changing the door hinges

The door hinges are on the right upon delivery.

As changing the door hinges requires some

manual skills, please read through the steps

of the procedure beforehand. To change the

door hinges, you will need the following tools:

– Cross-head screwdriver

– 8 and 10 mm open-end wrench or socket

wrench

1. Pull out the blind plug from the top of the

door.

2. Loosen both screw covers on the top of

the cover using a screwdriver.

3. Unscrew the two screws (on the left and

right) from the top of the cover. To do this,

use a cross-head screwdriver.

4. Lever out the two sides of the cover on

the front slightly and lift the cover up. In

doing so, ensure you do not damage the

temperature controller 1.

5. Unscrew the three fixing screws for the

hinge plate and the two screws on the op-

posite side. To do this, use an 8mm span-

ner or a cross-headed screwdriver.

Remove the hinge plate.

6. Screw the hinge plate as well as the two

screws back onto the respective opposite

side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HGS 8555A2S in the language / languages: English, German as an attachment in your email.

The manual is 1,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hanseatic HGS 8555A2S Manual

Product: