Manual Hanseatic HGS 17060A2S (page 41 of 56) (English, German)

711933

Zoom out

Zoom in

1/56

HGS 17060A2, HGS 17060A2S

Setting up the freezer

Preparation

Setting up the freezer

Changing the door hinges

The door hinges are on the right upon delivery. As changing the

door hinges requires some manual skills, please read through the

steps of the procedure beforehand. To change the door hinges,

you will need the following tools:

– Cross-head screwdriver

– 8 and 10 mm open-end wrench or socket wrench

1. Open the freezer door.

2. Hold on tightly to the open door and loosen the two screws 7of

the hinge plate.

3. Remove the hinge plate and lift the door out of the lower hinge

pin.

4. Unscrew the screw 8 from the hinge plate and relocate/reposi-

tion the hinge pin as shown in the illustration on the right.

5. Attach the hinge pin and hinge plate cover again using the

screw 8.

6. Remove the cover cap 9 in the left upper corner of the freezer.

7. Hold on tightly to the front cover and loosen both screws which

were covered by the cover cap. The temperature controller 1

may fall out upon loosening the screws.

Remove the mounting 10 and the screws.

8. Screw the mounting back onto 10 the opposite side.

9. Put the cover cap 9 on the mounting 10.

10. Remove the blind plug from the upper part of the door and

put it on the opposite side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HGS 17060A2S in the language / languages: English, German as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hanseatic HGS 17060A2S Manual

Product: