711924
42
Zoom out
Zoom in
Previous page
1/60
Next page
Start-upPage GB-12
Start-up
The correct storage location
The device should not be positioned direct-
ly next to a refrigerator or deep freezer. The
heat emitted from the device would cause
unnecessarily higher energy consumption by
the fridge or freezer.
There must be at least a minimum distance
of 2 m from radio devices and televisions, in
order to ensure that the reception is not dis-
torted.
The base upon which the device should be
positioned must be level, sufficiently stable
and heat resistant.
When selecting a location for the device,
please ensure to choose a place away from
heat, steam or high air humidity. The device
may not be used outdoors.
Please ensure that no highly flammable ma-
terials are located in the vicinity of the device.
The socket must be near to the device and
easily accessible, in order that the plug can
be quickly pulled out in the event of any mal-
function.
In order to ensure sufficient air circulation,
the following minimum lateral and vertical
distances must be complied with:
Upwards: 30 cm
Backwards: 0 cm
To the left: 20 cm
To the right: 20 cm
As measured from the base, the installation
height must be at least 85 cm.
Insert rotary plate
Mikrowelle
Auto Menü
Grill
Kombi.
HeißluftAuftauen
Vitalprogramme Stopp/LöschenECO
Uhrzeit/
Timer
Bestätigen
Start
Mik
rowe
lle
Auto Men
ü
G
rill
K
ombi
.
H
e
i
ß
l
uft
A
uftauen
Vi
ta
l
programm
e
S
topp
/
L
ö
sche
n
E
CO
U
hrzeit
/
Ti
mer
Best
ä
ti
g
en
Star
t
A
uto
M
e
n
ü
Vitalpro
g
ramm
e
Mikrowell
e
G
ril
l
g
C
k
g
M
S
Heißluft
K
om
bi.
Auftaue
n
Uh
rze
it
Ti
mer
888
88
88
(2)
(4)
(3)
1. Position the rotary plate drive (4) in the
hole in the middle of the cooking chamber
floor. Turn the rotary plate drive slightly so
that it slots into place and can no longer
be turned.
2. Position the roller ring (3) centrally into
the recess in the cooking chamber floor.
3. Place the rotary plate (2) centrally on the
roller ring. Turn the rotary plate slightly as
needed so that it slots into the rotary plate
drive.
Please note:
Never use the oven without the rotary
plate.
Always place the cooking container on
the rotary plate. This ensures that the mi-
crowaves are distributed evenly, and that
any liquid overflow from the food into the
device is avoided.
Cleaning before use
Please clean the device before its first
use (see „Care and maintenance“ on
page GB-24).
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic AC925EC3-S00E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic AC925EC3-S00E in the language / languages: English, German as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info