513840
42
Zoom out
Zoom in
Previous page
1/54
Next page
41
English
6.1.4 Setting Volume Lock
Operating procedures are as follows:
1. Press the corresponding electronic equipment button. The indicator light will come
on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on
again, showing that the setting mode has been entered.
2. While holding the electronic equipment button, press VOL+ twice consecutively to
assign volume lock to that electronic equipment (meaning the volume buttons will
only transmit code values to the assigned electronic equipment even under other
electronic equipment modes). The indicator light then goes off and setting mode is
exited.
3. While holding the electronic equipment button, press VOL- twice consecutively to
cancel volume lock under current mode (for example, if volume lock was set under
TV mode and you wish to transmit code values under current DVD mode, just
perform this unlock operation, while those electronic equipment modes not operated
still have volume locked up). The indicator light then goes off and setting mode is
exited.
4. During the setting process, releasing the electronic equipment button exits the
setting mode immediately without changing the status prior to setting.
5. Buttons other than VOL+/VOL- are not functional during search. Volume buttons
include VOL+, VOL- and MUTE.
6.1.5 Setting Channel Lock
Operating procedures are as follows:
1. Press the corresponding electronic equipment button. The indicator light will come
on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on
again, showing that the setting mode has been entered.
2. While holding the electronic equipment button, press CH+ twice consecutively to
assign channel lock to that electronic equipment (meaning the channel buttons will
only transmit code values to the assigned electronic equipment even under other
electronic equipment modes). The indicator light then goes off and setting mode is
exited.
3. While holding the electronic equipment button, press CH- twice consecutively to
cancel channel lock under current mode (for example, if channel lock was set under
TV mode and you wish to transmit code values under current CABLE mode, just
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hannspree ST 588 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hannspree ST 588 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info