513821
8
Zoom out
Zoom in
Previous page
1/23
Next page
Users Manual
INSTALLATION INSTRUCTIONS
INSTALL REMOVE
Figure.1. Installing and Removing the Base
INSTALLATION:
1. Align the base frame to the notch on the bracket and press it in.
A clear click will be heard if it is
properly installed.
2. Lay flat the display unit with its front face facing downward, align the properly installed bracket
to the slot at the backside of the display unit and insert it.
Please note that the longer end of the
base frame shall point to the front face of the display unit.
3. Pull up by hand the ring of the screw enclosed to the vertical state, then screw down the screw
clockwise with force so that the bracket is firmly fixed to the display unit.
REMOVAL:
1. Lay flat the display unit with its front face facing downward, screw off the screw anticlockwise
by hand.
2. Remove the bracket from the display unit.
3. Press the two snaps used for fixing the bracket on the base frame and take down the bracket to
separate them.
POWER
POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord one end to your LCD monitors AC-input socket, the other end to
wall-outlet.
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hannspree HP195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hannspree HP195 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info