757028
6
Zoom out
Zoom in
Previous page
1/80
Next page
6
PICTURE 1a/1b
1. Nozzle
2. Glue stick
3. Feed trigger
4. Stand
5. Temperature switch
PICTURE 1c
6. On/off switch with indicator light
7. Detachable cord
8. Stand release button
9. Exchangeable nozzle
USE
SWITCHING ON/OFF
SWITCHING ON:
Plug Dremel Glue Gun into a standard 230 V
electrical outlet.
Models 910, 920 and 930:
Once the glue gun is plugged in, it is on and
heating.
Dual Temperature Glue Gun Model 930:
Adjust switch (5) to low or high temperature
setting to turn the Glue Gun on. Consult with
glue stick package to determine appropriate
temperature.
Model 940:
Connect the power cord to the glue gun.
Switch the glue gun on with the main switch.
Indicator light (6) will let you know the glue gun
is on and heating.
SWITCHING OFF:
Pull the mains plug (models 910, 920 and 930).
Switch the unit ON/OFF with switch (6; model
940). Pull the mains plug.
Allow the unit to cool completely before storing. The
hot nozzle can cause damage.
GETTING STARTED
PREPARATIONS FOR GLUING
The surfaces to be glued must be clean, dry and
free of grease. Roughen smooth surfaces before
gluing. DO NOT USE INFLAMMABLE SOLVENTS FOR
CLEANING! The ambient temperature and the work
piece to be glued must not be colder than +5 °C or
warmer than +50 °C. Warm rapidly cooling materials
(e.g., steel) for better adhesion.
GLUING
DANGER OF BURNING! The glue and the nozzle tip (1)
become very hot. Do not allow the nozzle tip or hot
glue to come into contact with persons or animals. If
hot glue touches the skin, immediately hold the spot
for some minutes under a stream of cold water. Do not
try to remove the glue from the skin.
Models 910, 920 and 930:
Allow glue gun to reach operating temperature
before using (±5mins).
Insert the glue stick (2). Press the feed
trigger (3).
Model 940:
Once the cord is detached, the glue gun
remains operable for 5mins, before it needs to
heat up.
NOTE: For your first use, you may need to load up to
two full glue sticks before glue begins to flow.
Squeeze trigger (3) to apply glue onto desired
surface.
Apply parts together.
Allow glue to cool before handling object or
surface.
TIP: Dremel also supplies glitter and colour sticks
for decorative purposes. These sticks have been
specially developed for creative projects and low
temperature (105 °C).
The colour sticks can also be used for sealing
decorations. To be able to quickly change colours, it
is recommended to cut the sticks into 3 cm pieces
before inserting into the Glue Gun.
GLUESTICKS
Glue
Model
910 920 930 940
165°C
105°C
165°C
105°C
195°C
GG01
Multipurpose glue, 7mm - -
GG02
Multipurpose glue, 7mm - -
GG03
Woodglue, 7mm - -
GG04
Glitter glue, 7mm - -
GG05
Colour glue, 7mm - -
GG11
Multipurpose glue, 11mm - - -
GG13
Woodglue, 11mm ---
2610399275-GlueGun-EU-0610.indb 610399275-GlueGun-EU-0610.indb 6 3-6-2010 12:47:043-6-2010 12:47:04
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Handson 402084 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Handson 402084 in the language / languages: Dutch, French as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info