514568
16
Zoom out
Zoom in
Previous page
1/50
Next page
Storingen
16 Versie 2011v3
4 Storingen
4.1 Storingslijsten
Als de scooter niet functioneert, terwijl de
accu's voldoende geladen zijn, controleer dan
de volgende punten.
A. Schakel de scooter uit en weer in.
Controleer of de storing is verholpen.
B. Controleer of alle accustekers goed
bevestigd zijn en goed vast zitten.
C. Controleer of de vrijloophendel in de stand
R
IJDEN
staat.
D. Controleer of de stand van de
snelheidsregelaar niet is gewijzigd.
E. Bij storing knipperen de lichtjes van de accu
conditiemeter. Gebruik de onderstaande
tabel om de oorzaak te achterhalen.
Aanduiding op display
Foutbeschrijving
Te nemen acties
De complete LED-bar knippert
snel.
De Egis beveiliging heeft iets
gevonden dat een probleem
veroorzaakt.
Schakel de scooter uit.
Controleer alle connectoren.
Controleer de accu conditie.
Benader de fabrikant als de LED-bar
blijft knipperen na het inschakelen
van de scooter.
De stekerled brandt continue na
het inschakelen van de scooter.
Kortsluiting in de potmeter.
Tiller PCB bekabeling naar de
Controller interface is niet
goed.
Tiller PCB bekabeling naar de
vingerbediening is niet goed.
Tiller PCB is niet goed.
Neem contact op met de
fabrikant.
De eerste rode LED van de LED-
bar brandt continue.
De accu moet worden opgeladen
of er is een slechte verbinding
naar de accu's.
Controleer alle aansluitingen tussen
de controllers en de accu's. als de
aansluitingen goed zijn, probeer dan
de accu op te laden.
LED balk loopt van links naar
rechts
De accu wordt opgeladen. Koppel de acculader los van de
scooter.
Twee LED’s van de LED-bar
branden.
De motor verbinding is slecht. Controleer alle aansluitingen tussen
de controller en de motor.
Drie LED’s van de LED-bar
branden.
De motor heeft kortsluiting. Controleer de motorkabels of
vervang de motor.
Zeven LED’s van de LED-bar
branden.
De gasbediening is ingedrukt
tijdens het opstarten.
De snelheidspotmeter geeft
een fout
Start opnieuw op, maar nu zonder
de gasbediening in te drukken.
Contoleer de snelheidspotmeter.
Acht LED’s van de LED-bar
branden.
De controller heeft een fout. Vervang de controller.
Negen LED’s van de LED-bar
branden.
De vrijloophendel staat in de
duwstand.
De rem heeft een fout
Zet de vrijloophendel in de rijstand
Controleer de verbindingen
tussen rem en de controller.
Vervang de rem
Tien LED’s van de LED-bar
branden.
De accu heeft een fout.
Controleer de verbindingen
tussen de accu's en de controller.
Contoleer de accu's.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Handicare TROPHY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Handicare TROPHY in the language / languages: Dutch as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info