495094
5
Zoom out
Zoom in
Previous page
1/12
Next page
*#1 :2-Owner’s Manual
5
MOUNTING THE EXPRESSION PEDAL
Mounting the EXP-100F Mounting the V-20R
By use of a #2 Phillips screwdriver, temporarily remove the
screw as shown from the bottom of the EXP-100F. Place the
EXP-100F on top of the Expression Bracket 1. Fasten the
EXP-100F to the front of the bracket as shown using the 2 -
M4 x 5mm screws supplied. Using the screw that you previ-
ously removed, fasten the EXP-100F to the bottom of the
bracket as shown.
Place the Expression Bracket 1 on top of the XPK-200 as
shown. Fasten the Bracket to the XPK-200 by turning the 2
knob bolts supplied clockwise.
Place the Expression Bracket 1 on top of the XPK-200 as
shown. Fasten the Bracket to the XPK-200 by turning clock-
wise the 2 knob bolts supplied.
Place the V-20R on top of the Expression Bracket 1 and route
the cord through the read hole in the Bracket as shown. Place
the Bracket Spacer on the Expression Bracket 1 as shown
and fasten the spacer to the bracket with a #2 Phillips screw-
driver and 2 - ø4 x 8mm screws.
Fasten the V-20R to the Expression Bracket 1 by sliding the
Expression Bracket 2 onto the Expession Pedal assembly as
shown and turning clockwith the knob bolt supplied.
attached
EXP-100F
M4 x 5 screws
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XPK-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XPK-200 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info