495093
28
Zoom out
Zoom in
Previous page
1/41
Next page
26
Advanced Features
Hammond XPK-100 Quick Features Guide
Current Parameter
Current Parameter
Current Value
Your Selected Value
Current Parameter Current Value
Ë Advanced Feature - E10 Program Number
This Advanced Feature allows you to select the Program Number that will be transmitted. You can select
from “1" through “128.” The default setting is the same as the selected Preset number (“P01" is Program
Number 1, “P02" is Program Number2, etc.).
NOTE: You can also select “OFF,” meaning that no Program Number data will be sent.
TRY THIS:
1. From PLAY Mode, press the PLAY/EDIT Switch once. The Information Center Display
should alternate between two messages as shown below:
2. Press the PRESET/EDIT Switch repeatedly until the Information Center Display
alternates between two messages as shown below:
NOTE: You can also press the PRESET/EDIT Switch to arrive at the same Advanced Feature selection.
3. Now use the Pedal keys to select the Program number you want.
Using the DEC/INC Pedal keys:
Use the DEC (“A<”) Pedal key to scroll down through the Program numbers.
Use the INC (“B”) Pedal key to scroll up through the Program numbers.
4. When you have made your selection, then press the Hi “C” Pedal once. The Information
Center Display will show you the current parameter alternating with your selected value:
5. To exit the EDIT Mode and return to PLAY Mode, press the “Hi C” Pedal again.
NOTE: After doing the above, you will notice a small red dot between the first and second characters of the
Information Center Display. This indicates that your new value has not been saved to a Preset. For information
on how to save your settings to a Preset, see page 34.
6. To continue editing, instead of pressing the Hi “C” Pedal, use the PRESET/EDIT Switches
to select the parameter you want to edit. When you are finished editing, press the “Hi
C” Pedal once to return to PLAY Mode. All of your changes will now take effect.
NOTE: The CONTROL Channel and the PK MIDI Channel must be set to the same number in order for Program
Changes to be properly recognized by the receiving instrument.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XPK-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XPK-100 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info