495079

Hammond XM-2 Manual

71
Zoom out
Zoom in
Previous page
1/90
Next page
Setting The Parameters
71
In this mode you can set the zones to play the built-in sound engine in this unit
for Split, Manual Bass, etc.
To locate this mode:
Touch the [MENU/EXIT] button to display the MENU, select PAGE D by the [PAGE]
button. Then select “KEYMAP” by the [PARAM] button and touch the [ENTER]
button.
KEYMAP
SPLIT
SPLIT functions when the settings of the MIDI IN mode is “SNG”.
1. SPLIT - SWITCH
This is for switching ON/OFF the SPLIT function.
If you switch it ON, the received Note Data is divided/distributed
to each of the LOWER/UPPER parts at the Split Point ( = See
below.), which allows you to play both (LOWER/UPPER) parts
by a single MIDI Keyboard.
2. SPLIT - POINT
This is for setting the point ( = the note) at which to split the
LOWER and the UPPER parts, when you use the SPLIT func-
tion.
The setting value is the highest note used in the LOWER part.
3. SPLIT - LOWER OCTAVE
This is for setting the pitch of the split LOWER part by the oc-
tave.
If you use the SPLIT function, the pitch of the LOWER part may
be too low and so may not be suitable for playing chords.
In such a case, you can raise the pitch of the lower octave.
MANUAL BASS
MANUAL BASS functions when the settings of the MIDI IN
mode is “SNG” or “LOW”.
4. MANUAL BASS - SWITCH
This is for switching ON/OFF the Manual Bass function.
If you switch it ON, the PEDAL part plays by receiving the Note
Data in the range upto the Manual Bass Point ( = See below.).
Thus you can play both (Manual and Pedal) parts on a single
MIDI Keyboard.
NOTE: You can choose POLY (for playing chords) or MONO
(sounding only lowest note). (P. 51 #15)
5. MANUAL BASS - POINT
This is for setting the uppermost note where the Manual Bass
functions.
WHAT IS SPLIT?
It is a function to divide a single MIDI Keyboard into two sepa-
rate (right and left) parts (LOWER/UPPER) at a certain note.
WHAT IS MANUAL BASS?
It is a function to assign a certain range on a single MIDI Key-
board as the LOWER part to allow you to play together with the
Manual part at the same time.
1 2 3 4 5
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info