495079
66
Zoom out
Zoom in
Previous page
1/90
Next page
*#1 :/Owner’s Manual
66
EQUALIZ (EQUALIZer)
1. EQ BOOST/CUT - BASS
2. EQ BOOST/CUT - MIDDLE
4. EQ BOOST/CUT - TREBLE
This is for changing the Boost/Cut of Bass, Mid-range and Treble respectively.
The setting range is -9 to +9. The gain is flat at 0.
3. EQ FREQUENCY - MIDDLE
This is for changing the center frequency range - Middle (item #2).
The frequency center range is 480Hz - 2.9kHz.
NOTE: These parameters are Patch Parameters and are recorded to each Patch.
THE EFFECTIVE USE OF THE MIDDLE
FREQUENCY
The frequency response of the horn rotor in the
Leslie speaker is not flat. It has a peak from 1kHz
to 3kHz, The sensitive range for human ears.
When you use this module on line out without a
Leslie speaker, you can get the similar effect by
setting the FREQUENCY - MIDDLE to about 2kHz,
and the BOOST/CUT - MIDDLE to “+”.
PATCH PARAMETERS
Equalizer is a Patch Parameter designed to actively
use as one of the tone-making parameters.
However, it is not practical to use Equalizer as a
tonal complementary tool to match the location.
In such a case, if you switch OFF the P.LOAD RV/
EQ in the PATCH function mode, the Equalizer value
does not change when the patch is recalled. (P. 52
#7)
In this mode, the Equalizer settings are made.
The Equalizer is an effect for adjusting the tonal quality. The built-in Equalizer in
this unit consists of 3 bands. You can divide the whole range from bass to treble into
3 independent ranges and adjust/control each of them individually.
To locate this mode:
Touch the [MENU/EXIT] button to display the MENU, select Page C by [PAGE]. Next,
select “EQUALIZ” by [PARAM] button and then touch [ENTER] button.
1 2 4
3
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info