495079
11
Zoom out
Zoom in
Previous page
1/90
Next page
Introduction
11
POWER SUPPLY
16. DC IN Jack
Connects the attached AC Adaptor AD1-1508 (100 - 120V)
AD3-1508 (220 - 240V).
SOUND OUTPUT TERMINAL
17. LINE OUT L/MONO Jack
If your amplifier has only a single (1) female 1/4" audio
input connector (MONO input), use this Jack.
18. LINE OUT R Jack
This is the Right channel output of the XM-2.
Use the Left and Right output Jacks if your mixer or ampli-
fier has stereo inputs.
Use only the L/MONO terminal, if the input is monaural.
The built-in Leslie Effect is only on L (the left), when the
Leslie Speaker (20) is connected.
19. HEADPHONE Jack
This is for connecting a set of stereo headphones.
Sound is sent out from the LINE-OUTS (17, 18) and
LESLIE 8PIN (20), also when this terminal is used.
The built-in LESLIE is only on L (the left), when the
LESLIE SPEAKER (20) is connected.
20. LESLIE 8PIN Jack
This is for connecting the Leslie 21 System Speaker.
Read “CONNECTING THE LESLIE SPEAKER” for more
details.
CONTROLLER TERMINAL
21. EXP. PEDAL Jack
This terminal is for the Expression Pedal (V-20R - optional).
You can control the volume while you play.
22. FOOT SWITCH Jack
This terminal is for the Foot Switch (FS-9H - optional).
You can switch the speed of the Leslie effect and the Patch,
etc. while playing.
MIDI
23. MIDI OUT Jack
Outputs the internal information of this unit and the play-
ing information from the MIDI IN terminal (according to
the setting).
24. MIDI IN 1 Jack
Receives the MIDI information.
The factory setting of this terminal is for receiving the in-
formation through the MIDI channel.
You can also set it for receiving only a specified part infor-
mation, regardless of the channel.
25. MIDI IN 2 Jack
Receives the MIDI information.
The factory setting of this terminal is for receiving the in-
formation through the MIDI channel.
You can also set it for receiving only a specified part infor-
mation, regardless of the channel.
Rear Panel
16 19 17 18 20 21 22 25 24 23
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info