495079

Hammond XM-2 Manual

4
Zoom out
Zoom in
Previous page
1/90
Next page
*#1 :/Owner’s Manual
IMPORTANT - PLEASE READ
Power Supply
Do not use this unit on the same power circuit with any device that
will generate line noise (such as an electric motor or variable light-
ing system).
The AC adaptor will begin to generate heat after long hours of con-
secutive use. This is normal, and is not a cause for concern.
Before connecting this unit to other devices, turn off the power to
all units. This will help prevent malfunctions and/or damage to speak-
ers or other devices.
Placement
Using the unit near power amplifiers (or other equipment contain-
ing large power transformers) may induce hum. To alleviate the prob-
lem, change the orientation of this unit; or move it farther away
from the source of interference.
This device may interfere with radio and television reception. Do
not use this device in the vicinity of such receivers.
Noise may be produced if wireless communications devices, such
as cell phones, are operated in the vicinity of this unit. Such noise
could occur when receiving or initiating a call, or while conversing.
Should you experience such problems, you should relocate such
wireless devices so they are at a greater distance from this unit, or
switch them off.
Do not expose the unit to direct sunlight, place it near devices that
radiate heat, leave it inside an enclosed vehicle, or otherwise sub-
ject it to temperature extremes. Also, do not allow lighting devices
that normally are used while their light source is very close to the
unit (such as a piano light), or powerful spotlights to shine upon the
same area of the unit for extended periods of time. Excessive heat
can deform or discolor the unit.
When moved from one location to another where the temperature
and/or humidity is very different, water droplets (condensation) may
form inside the unit. Damage or malfunction may result if you at-
tempt to use the unit in this condition. Therefore, before using the
unit, you must allow it to stand for several hours, until the conden-
sation has completely evaporated.
Do not allow rubber, vinyl, or similar materials to remain on the
unit for long periods of time. Such objects can discolor or other-
wise harmfully affect the finish
Do not paste stickers, decals, or the like to this instrument. Peeling
such matter off the instrument may damage the exterior finish.
Maintenance
To clean the unit, use a dry, soft cloth; or one that is slightly damp-
ened.
To remove stubborn dirt off plastic parts, use a cloth impregnated
with a mild, non-abrasive detergent. Afterwards, be sure to wipe
the unit thoroughly with a soft, dry cloth. Try to wipe the entire
surface using an equal amount of strength, moving the cloth along
with the grain of the wood. Rubbing too hard in the same area can
damage the finish.
Never use benzine, thinners, alcohol or solvents of any kind, to avoid
the possibility of discoloration and/or deformation.
Additional Precautions
Please be aware that the contents of memory can be irretrievably
lost as a result of a malfunction, or the improper operation of the
unit. To protect yourself against the risk of losing important data,
we recommend that you periodically save a backup copy of impor-
tant data you have stored in the unit’s memory in another MIDI
device (e.g., a sequencer).
Unfortunately, it may be impossible to restore the contents of data
that was stored in another MIDI device (e.g., a sequencer) once it
has been lost. Hammond assumes no liability concerning such loss
of data.
Use a reasonable amount of care when using the unit’s buttons, slid-
ers, or other controls; and when using its jacks and connectors. Rough
handling can lead to malfunctions.
When connecting / disconnecting all cables, grasp the connector
itself - never pull on the cable. This way you will avoid causing
shorts, or damage to the cable’s internal elements.
To avoid disturbing your neighbors, try to keep the unit's volume at
reasonable levels. You may prefer to use headphones, so you do not
need to be concerned about those around you (especially when it is
late at night).
When you need to transport the unit, package it in the box (includ-
ing padding) that it came in, if possible. Otherwise, you will need to
use equivalent packaging materials.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info