495088
12
Zoom out
Zoom in
Previous page
1/16
Next page
*#1 :-5[UVGOOwner’s Manual
12
ADVANCED OPERATION FOR THE XPK-3
REBOUND TIME
MIDI CHANNEL
LOAD DEFAULT VALUES
If you play pedals with a staccato action or the leaf spring
used on the pedal keyboard may happen to change its char-
acteristic, it may cause “key bounce” on the key when you
release it.
You can avoid it by adjusting the “Rebound Time”.
To change the value, turn on the power while pressing the
highest B and the key corresponding to its value. (See the
left figure.)
Then, the LED on the left of the Expression Pedal blinks
slowly the number of times indicating the value.
The setting range is 1 to 16 times (x) 1.22 milliseconds. 4
times (x) 1.22 milliseconds is the default.
Note: Too long rebound time causes delay in the sound.
You can change the MIDI channel of the Pedal Keyboard for
special purposes.
To change the MIDI channel, turn on the power while press-
ing the highest C and the key corresponding to its value.
(See the left figure.)
Then, the LED on the left of the Expression Pedal blinks fast
the number of times indicating the value.
The setting range is Channel 1 to 16. Channel 3 is default.
To reset the XPK-3 to the initial status, turn on the power
while pressing the highest A#, B and C.
Then, the LED on the left side of the Expression Pedal blinks
three times, indicating the reset procedure.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XLK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XLK-3 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info