495089
3
Zoom out
Zoom in
Previous page
1/16
Next page
Model :-5[UVGO
Owners Manual
*#1 *#1
*#1 *#1
*#1
Thank you, and congratulations on your choice of a Hammond XK-
System.
The XK-System is the lower keyboard unit (XLK-B3) and
pedalboard (XPK-3) for Hammond XK-3.
In order to get the most out of this instrument for many years to
come, first take the time to read this manual in full.
*#1 :-5[UVGOOwner’s Manual
2
IMPORTANT SAFETY NOTICE
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or ground-
ing-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and a third grounding prong. The wider blade or third prong
is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When cart is used:
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms, or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servic-
ing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
WARNING: To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
The lightning flash with arrowhead symbol within an equilateral
triangle, indicates that dangerous voltage constituting a risk of elec-
tric shock is present within this unit.
The exclamation point within an equilateral triangle, indicates that
there are important operating and maintenance instructions in the
literature accompanying this unit.
*#1 :-5[UVGOOwner’s Manual
3
ATTENTION
Follow instructions:
All operation and user instructions should be
followed.
Do Not Disassemble:
Do not disassemble this unit.
Servicing:
The user should not attempt to service the
appliance beyond that is described in the
Operation Instructions. All other servicing
should be referred to qualified service
personnel.
Location:
Using the unit in the following locations can
result in a malfunction.
In direct sunlight
Locations of extreme temperature or
humidity
Excessively dusty or dirty locations
Locations of excessive vibration
Close to magnetic fields
Object and Liquid Entry:
Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure
through openings.
Damage Requiring Service:
The appliance should be serviced by qualified
service personnel when:
The power supply cord or the plug has
been damaged; or
Objects have fallen, or liquid has been
spilled into the appliance; or
The appliance has been exposed to rain;
or
The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
The appliance has been dropped, or the
enclosure damaged.
Children:
If you let your children use this unit, please
always watch and guide them and do not leave
them alone.
Do Not Cause a Shock
Do not drop or cause a shock to this unit.
CAUTION
Stack/Ride:
Do not stack heavy devices or get on this
unit. Such may cause personal injuries or
falling down.
Transfer:
Remove all the cables and AC adaptor when
you transfer this unit, to avoid damages on
the cables and AC adaptor, or an electric
shock or fire.
Do Not Pull the Cord:
Be sure to grasp the plug when unplugging it
from a wall outlet. Pulling on the power cord
can damage it, and create the danger of fire and
electrical shock.
Hook Up:
Turn off all devices before hook up.
Follow all instructions and use only designated
cables.
Movable Parts:
Make sure not to pinch your fingers when you
assemble or disassemble this unit.
This symbol indicates information that, if ignored or applied incorrectly,
creates the possibility of death or serious personal injury.
This symbol indicates information that, if ignored or applied incorrectly,
creates the possibility of personal injury or property damage.
*#1 :-5[UVGOOwner’s Manual
4
NAMES AND FUNCTIONS
XLK-B3
XPK-3
The XLK-B3 cabinet functions as
the Lower Keyboard and
the Lower Preset Keys.
The System Power Switch and
the Extension Headphone Jack
are built in.
AC Cable
8-Pin Cable
MIDI Cable
Music Rack
Power
Switch
Lower Preset
Keys
Lower
Keyboard
Headphone Jack
Knob Bolt
Foot Switch
Expression
Pedal
Pedal Keyboard
LED
(on the left)
MIDI Out
Jack
Expression
Jack
*#1 :-5[UVGOOwner’s Manual
5
XK-SYSTEM STRUCTURE
*#1 :-5[UVGOOwner’s Manual
7
Plug in the key scan cable from the Pedal
Keyboard to the Expression Pedal.
Note that the connector is polarized and
only plugs in one way.
Mount the Expression Pedal on the Pedal
Keyboard using the Screw (knob bolt).
Plug in the 8-Pin cable to the Expression
jack and the MIDI cable to the MIDI out
jack.
3.
4.
5.
Insert into the
opening
Screw
Lock
*#1 :-5[UVGOOwner’s Manual
8
HOW TO SET UP
Turn on the power
of the XLK-B3.
Then all of the system turns on.
After a little while, the PLAY screen will be displayed.
Touch the [MENU/EXIT] button.
Select the page D using the [PAGE] button.
Touch the [2]MIDI button.
Select "Seq. Record" by the [1] PARAM button.
Touch the [4]RECL button.
You can return to the PLAY
screen using the [PLAY] button.
Now the set up is comlete.
This set up is backed up if the
power is switched off.
Note: If this screen does not appear, check the hook-up
and that the power switch of the XK-3 is “On”.
This procedure:
sets the MIDI connection for the LOWER and the PEDAL keyboard.
switches the [MANUAL BASS] to work on the LOWER keyboard.
turns off [SPLIT] function.
*#1 :-5[UVGOOwner’s Manual
9
PLAYING THE XLK-B3
When you hook up the XLK-B3 to the XK-3 and
set up as shown on Page 6, the manual on the
XK-3 operates as the UPPER part, and that of the
XLK-B3 as the LOWER Part.
RECALL THE LOWER PRESET
To recall the LOWER/PEDAL Presets only from the XLK-B3 and not from
the XK-3, turn off the “PRESET - LINK L/P” function in the PRESET
FUNCTION screen which appears with [MENU / EXIT] - [2]PRESET -
[PAGE UP] - [PARAM RIGHT].
For details, please read the “PRESET” section of “Setting the Parameters”
in the XK-3 Owner's Guide.
RECORD THE LOWER PRESET
You can memorize the setting for only the LOWER and the PEDAL Parts
for the XK-3 in the same BANK.
Ex: Record to the Preset Key [G]
Touch and hold the [REC/JUMP] button of the XK-3, and then touch the
Preset Key [G] of the XLK-B3.
The following message is displayed in the XK-3 for a certain length of
time:
Recording Preset...
When the recording is completed, the LED on the Preset Key [G] quickly
blinks for a while and then slows down. Now the recorded Preset Key is
automatically selected. And the screen returns to the previous display.
Note: Preset Key [B] can not be memorized in this way.
The XK-3 can recall the Combination Preset for the
LOWER Part (including the PEDAL), independently
of the UPPER Part in the same BANK.
The XK-3 recalls all Parts (UPPER, LOWER and PEDAL) combined, when
you touch the Preset Keys, as the factory default.
The Preset Keys on the XLK-B3 are used to recall the LOWER (and the
PEDAL) Preset independently.
For example, when you touch the Preset Key [E] of XLK-B3 during the
Combination Preset of the XK-3 is in “F-D”, it recalls the LOWR and the
PEDAL Parts “F-E”, while the UPPER remains in “F-D”.
In such a case, the Preset LED's on the XK-3 light on, indicating the UP-
PER Parts, while those for indicating the LOWER and the PEDAL Parts
blink slowly.
UPPER:UPPER:
UPPER:UPPER:
UPPER:
LightsLights
LightsLights
Lights
LL
LL
L
OWER:OWER:
OWER:OWER:
OWER:
Blinks SlowlyBlinks Slowly
Blinks SlowlyBlinks Slowly
Blinks Slowly
TT
TT
T
ouch and Holdouch and Hold
ouch and Holdouch and Hold
ouch and Hold
TT
TT
T
ouchouch
ouchouch
ouch
TT
TT
T
ouchouch
ouchouch
ouch
LL
LL
L
OWER:OWER:
OWER:OWER:
OWER:
Blinks Blinks
Blinks Blinks
Blinks
FF
FF
F
astast
astast
ast
then Slowlythen Slowly
then Slowlythen Slowly
then Slowly
*#1 :-5[UVGOOwner’s Manual
10
ADVANCED FEATURES FOR XLK-B3
To use the headphones, connect the plug to the headphone jack.
Sound is sent out from the LINE-OUT and the LESLIE 11-PIN,
also when this jack is used.
The built-in LESLIE is only on L (the left), when the LESLIE
SPEAKER is connected.
USING THE HEADPHONES
TRANSMITTING THE VELOCITY MESSAGES
TT
TT
T
ouch and Holdouch and Hold
ouch and Holdouch and Hold
ouch and Hold
OnOn
OnOn
On
The XLK-B3 senses no velocity. The maximum value is trans-
mitted in default. For sensing and sending the velocity, turn on
the power pressing either of the Preset Keys on the left hand
side of the XLK-B3.
Note: When the Velocity is On, the keys sound at a slightly deeper
point in key travel.
Note: This function is not backed-up.
*#1 :-5[UVGOOwner’s Manual
11
PLAYING THE XPK-3
The Expression Pedal is used for expressing the volume and
adding intonation to make your music more expressive.
To enable the Expression Pedal on the XPK-3, select the “EXP-
100” for the Experssion - Source.
To come to this mode:
Touch the [MENU/EXIT] button and display the MENU and
select PAGE A by the [PAGE] button, and then touch the [4]
CONTROL button, touch [PAGE UP] 3 times.
For details, please read the “CONTROL” section of “Setting the
Parameters” in the XK-3 Owners Manual.
The Foot Switch is used to operate and control the organ by
your foot instead of pressing various switches by hand while
playing. The initial factory assignment is “LESLIE FAST”.
To change the assignment of Foot Switch on XPK-3, use “FOOT
2(EXP-100) MODE”.
To come to this mode:
Touch the [MENU/EXIT] button and display the MENU and
select PAGE A by the [PAGE] button, and then touch the [4]
CONTROL button, touch the [PAGE UP] button 4 times, and
touch the [PARAM RIGHT] button 4 times.
For details, please read the “CONTROL” section of “Setting the
Parameters” in the XK-3 Owners Manual.
EXPRESSION PEDAL ASSIGNMENT
FOOT SWITCH ASSIGNMENT
*#1 :-5[UVGOOwner’s Manual
12
ADVANCED OPERATION FOR THE XPK-3
REBOUND TIME
MIDI CHANNEL
LOAD DEFAULT VALUES
If you play pedals with a staccato action or the leaf spring
used on the pedal keyboard may happen to change its char-
acteristic, it may cause “key bounce” on the key when you
release it.
You can avoid it by adjusting the “Rebound Time”.
To change the value, turn on the power while pressing the
highest B and the key corresponding to its value. (See the
left figure.)
Then, the LED on the left of the Expression Pedal blinks
slowly the number of times indicating the value.
The setting range is 1 to 16 times (x) 1.22 milliseconds. 4
times (x) 1.22 milliseconds is the default.
Note: Too long rebound time causes delay in the sound.
You can change the MIDI channel of the Pedal Keyboard for
special purposes.
To change the MIDI channel, turn on the power while press-
ing the highest C and the key corresponding to its value.
(See the left figure.)
Then, the LED on the left of the Expression Pedal blinks fast
the number of times indicating the value.
The setting range is Channel 1 to 16. Channel 3 is default.
To reset the XPK-3 to the initial status, turn on the power
while pressing the highest A#, B and C.
Then, the LED on the left side of the Expression Pedal blinks
three times, indicating the reset procedure.
*#1 :-5[UVGOOwner’s Manual
13
In such cases as follows:
The XK-3 does not turn on when the XLK-B3 is switched on.
The power switch of the XK-3 turned off. >>
Turn on the power switch of the XK-3.
Check the LED on the rear of XLK-B3. The LED lights during it is operating.
The Manual Bass does not function on the XLK-B3 manual.
The setting of the XK-3 is not correct. >>
Set the MIDI template correctly in the XK-3 “MIDI” function screen. (Page 8)
TROUBLE SHOOTING
*#1 :-5[UVGOOwner’s Manual
14
MIDI IMPLEMENTATION (XLK-B3)
[Hammond MIDI Keyboard]
Date: 11-Feb-2005
Model: XLK-B3
Version: 1.0
Default
2X
Changed
X
Default
3X
Messages
XX
Altered
***** X
36 - 96 X
: True Voice
*****
Note ON
O *1 X
*1 when turned on by
Note OFF
XX
pressing the Preset Key
After
Key's
XX
Touch
Ch's
XX
Pitch Bender
XX
XX
O 0 - 11 X
Preset Keys
: True #
***** X
System Exclusive
XX
: Song Position
XX
: Song Select
XX
: Tune
XX
: Clock
XX
: Commands
XX
: Local On/Off
XX
: All Notes Off
XX
: Active Sense
OX
: Reset
XX
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO O: Yes
Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO X: No
Remarks
Basic
Channel
System
Real Time
Aux
Messages
Mode
Note
Number
Velocity
Control
Change
MIDI Implementation Chart
Function
Program
Change
System
Common
Transmitted Recognized
*#1 :-5[UVGOOwner’s Manual
15
MIDI IMPLEMENTATION (XPK-3)
[Hammond MIDI Keyboard]
Date: 23-Dec-2004
Model: XPK-3
Version: 1.0
Default
3X
Changed
1 - 16
Default
3X
Messages
XX
Altered
***** X
36 - 60 X
: True Voice
*****
Note ON
XX
Note OFF
XX
After
Key's
XX
Touch
Ch's
XX
Pitch Bender
XX
XX
XX
: True #
***** X
System Exclusive
XX
: Song Position
XX
: Song Select
XX
: Tune
XX
: Clock
XX
: Commands
XX
: Local On/Off
XX
: All Notes Off
XX
: Active Sense
OX
: Reset
XX
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO O: Yes
Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO X: No
Remarks
Basic
Channel
System
Real Time
Aux
Messages
Mode
Note
Number
Velocity
Control
Change
MIDI Implementation Chart
Function
Program
Change
System
Common
Transmitted Recognized
*#1 :-5[UVGOOwner’s Manual
16
SERVICE
SPECIFICATIONS
XLK-B3
Keyboard
73 (61 + 12 Preset keys) Water Fall shape
Panel Controls
Power on/off
Terminals
MIDI out
AC input, output
Headphones,
Expression (From Organ, To Exp. Pedal)
Dimension
48 inch(W), 25 inch(D), 8 inch(H) (without music rack)
Weight
67 lbs
In the United States contact:
HAMMOND SUZUKI USA, Inc.
733 Annoreno Dr.
Addison, IL 60101
UNITED STATES
In Europe contact:
HAMMOND SUZUKI EUROPE
B.V.
IR. D.S. Tuynmanweg 4A
4131 PN Vianen
THE NETHERLANDS
All other countries contact:
HAMMOND SUZUKI Ltd.
25-11, Ryoke 2 Chome
Hamamatsu 430-0852
(Shizuoka)
JAPAN
Hammond maintains a policy of continuously improving and upgrading its instruments and therefore reserves the right to
change specifications without notice. Although every attempt has been made to insure the accuracy of the descriptive
contents of this Manual, total accuracy cannot be guaranteed.
Should the owner require further assistance, inquiries should first be made to your Authorized Hammond Dealer. If you
still need further assistance, contact Hammond at the following addresses:
Website:
www.hammondorganco.com
E-mail: Info@hammondsuzuki.com
Website: www.hammondsuzuki.com
Website: www.suzuki-music.co.jp
Technical materials are available and can be obtained by mailing a request to the appropriate address listed above marked
ATTENTION: SERVICE DEPARTMENT.
Manufacturer:
SUZUKI MUSICAL INSTRUMENT MFG. CO., Ltd.
25-12, Ryoke 2 Chome
Hamamatsu 430-0852 (Shizuoka)
JAPAN
XPK-3
Keyboard
25 keys
Controls
Expression, Foot Switch
Terminals
MIDI out
Expression
Dimension
42 inch(W), 37 inch(D), 6 inch(H) (without expression pedal)
Weight
55 lbs
Printed in Japan
00457-40115
V1.00-050304
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XK-System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XK-System in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info