626612

Hammond XE-1 Manual

13
Zoom out
Zoom in
Previous page
1/213
Next page
Introduction
HA<O> Model XE-1 Basic Features Guide
3
ˆ Connecting a Power Supply for the XPK-100 or XLK-1
Since the XPK-100 and the XLK-1 require AC power but have no AC Power Switches, using the
DC power receptacle located on the back of the XE-1 allows you to turn one of these “ON” or
“OFF” from the AC Power Swicth of the XE-1.
NOTE: Use ONLY the power supply provided with the XPK-100 or XLK-1 to plug into the receptacle on the
XE -1. If other power supplies with different specifications are used, damage to one of both units could
result.
‰ Connecting both the XPK-100 and XLK-1 to the XE-1
The XPK-100 has inbuilt MIDI Merge circuitry, allowing it to interface with more than one MIDI
keyboard instrument. The recommended connection is shown on page 4.
NOTE: The DCC-2 cable is a special cable which allows you to interconnect several instruments requiring
AC power so that the entire hook-up can be turned “ON” and “OFF” from one AC Power Switch; in this
case, that of the XE-1. To order or purchase DCC-2 cables, contact your Hammond Dealer.
Š Other MIDI Connections
Your XE-1 can interface with a great number of MIDI-compatible devices. See the MIDI section
starting on page 54 for more information about MIDI connections and your Hammond XE-1.
Connecting an External Sound Source
You may connect an external sound source such as a Sound Module to the XE-1. In this way,
both the XE-1 and the external sound source can be heard through the same speaker system. If
you wish to do this:
1. Locate two audio cables with
1
/
4
" plugs on both ends of each cable.
2. Connect one end of each of the audio cables to the audio output connectors
on the external sound source.
3. Connect the other ends of the same audio cables to the jacks marked “LINE
IN” on the back of the XE-1.
Connecting a Microphone to the XE-1
If you plug a microphone into the MICROPHONE IN jack, you can use the XE-1 speakers and
amplifiers as a public-address system. You can control the Microphone Volume and add Echo
effects by means of the two rotary controls located next to the MICROPHONE jacks. An
additional jack marked OUT allows the Microphone signal to be heard through whatever
additional amplification you may be using with your XE-1.
Connecting a Computer to the XE-1
You may use a serial cable to connect a computer to your XE-1. Complete instructions on how to
do this are found staring on page 116 Of this Guide.
Connecting a Set of Headphones
A stereo headphone jack is provided on the left cheekblock so that you may play or practice in
privacy.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XE-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XE-1 in the language / languages: Dutch as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info